Product Description
Lint Filter Specifications
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Amana.
Part# W11607443 replaces these:
2006, 2007, 26000348851, 348846, 348851, 689465, 8211, 8219, 8557857, 8557882, 8558463, 8559787, 8565972, 99989680, 99989681, W10641634, W11451394, W11522758, W11538107
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marc V - October 25, 2023
Verified Purchase
Perfect Fit
It was a perfect fit and it seems of grate quality than the original one
Bonita S - February 11, 2022
Verified Purchase
Dryer filter
The part came the next day so I was able to resume doing my laundry. The part was exactly as pictured and works excellently.
Karin T - February 4, 2022
Verified Purchase
Bonnes dimensions
Reçue rapidement
Nigel M - November 10, 2021
Verified Purchase
Easy lint screen replacement.
The part was exactly as ordered and arrived a day sooner then promised.
Beverley V - October 23, 2021
Verified Purchase
Replacement lint filter
What a fantastic experience ordering from you …..customer service was fantastic ,very helpful and the replacement part arrived very quickly .The part fits perfectly and all is good ?? again in my laundry world ..lol Many thanks ??
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 26 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door catch broken; lint filter handle had come off
Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.
Other Parts Used:
-
Daniel from Wichita, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
448 of 476 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat - everything else was functional
After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.
Other Parts Used:
-
Kent from Sebastopol, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
70 of 82 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
Other Parts Used:
-
Richard from Fairfax, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
35 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old lint screen -torn at wire mesh
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
Other Parts Used:
-
Chris from Morgan City, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
27 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old lint screen on the dryer was broken
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
Other Parts Used:
-
Bill from Farmington Hills, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part number was different from the original, but it fit just fine.
installed the new dryer lint screen, it fit perfectly
and is now in operation.
and is now in operation.
Other Parts Used:
-
John from Bristol, CT
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
20 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace lint filter
with both hands
Other Parts Used:
-
Ed from Greensboro, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old screen failed ripped needed replaced.
After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.
Other Parts Used:
-
Michael from Kingman, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke on filter
just slide the new filter in.
Other Parts Used:
-
Connie from Gaithersburg, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum not turning; accompanied by loud "screeching" sound.
Followed instructional video provided for this type of repair after diagnosing problem via of 'troubleshooting' on PartsSelect site. Simple, safe, and relatively easy (minimal mechanical knowledge helpful).
Second time using PartSelect; washing machine repair ~ 6 mo. previous.
PartSelect was spot-on with that repair as well, saving hundreds of dollars.....my go-to site for appliance repairs and pats....make it yours as well and you will NOT be disappointed! Fast, prompt shipping.
Second time using PartSelect; washing machine repair ~ 6 mo. previous.
PartSelect was spot-on with that repair as well, saving hundreds of dollars.....my go-to site for appliance repairs and pats....make it yours as well and you will NOT be disappointed! Fast, prompt shipping.
Other Parts Used:
-
holly from LONG BCH TWP, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench (Adjustable)
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathy
February 29, 2024
How can I get a replacement handle for my lint filter part #689461
For model number 86878
Hello Cathy, thank you for your inquiry. The handle for the lint filter does not come separately. It comes along with the lint filter, part number PS11757278. If you need help placing an order for it, please feel free to give us a call!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16744854
Manufacturer Part Number: W11607443
Manufacturer Part Number: W11607443
Brand
Model Number
Description