![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
FILTER
$26.85
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number
PS16660526
Manufacturer Part Number
W11568797
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Admiral.
Part# W11568797 replaces these:
W11089264, W11297119
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
CHRISTOPHER
September 26, 2023
The washer runs through it's cycle but after the final spin the clothes are still soaking wet. I already replaced the suspension rod/springs and this did not resolve the problem Water pump is pumping fine. Is there a filter/s that I should look for? In the meantime I am going to pull the washer plate to see it i need a new fitting.
For model number MVWX655DW2
Hello Christopher, thank you for the question. Check the drain pump filter. Make sure the drain hose is not kinked or crushed. Make sure you do not overfill the washer and that the load is balanced. If the drain hose is installed too low or too high, water can either be siphoned out of the washer or it may fail to drain and thus remain in the washer. If the washer is not level, adjust its leveling legs until it is balanced. If the belt that drives the drum is loose or worn, it may not be able to spin the drum properly and restrict the washer’s ability to drain. Check the belt, part number PS12578772, and replace it if necessary. Good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
TOM
October 4, 2023
Where is the drain filter located?
For model number MVW7232HW0
Hi Tom, thank you for the question. According to our research, the drain filter is located under the inner tub. You may need to remove the inner tub to access the drain filter. We hope this helps!
Was this helpful?
Thank you for voting!
Mike
October 5, 2023
I have purchased many items on your site for my appliances. I have the above washer which I purchased new, in 2020. There is a strong damp smell emanating from the washer. We tried rinsing it with washing machine cleaners, but the smell still lingers.
Any suggestions?
Thanks in advance!
For model number MVWB835DW5
Hello Mike, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the drain hose for any clogging. If this is not the issue, you may need to replace the drain pump filter, part number PS16660526, to fix the issue. It traps all the dirt and residue from clothes. Often these filters can sit uncleaned causing the washer to smell. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16660526
Manufacturer Part Number: W11568797
Manufacturer Part Number: W11568797
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)