Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
November 26, 2021
Does this part keep the dryer from turning on, not getting any power to control board.
For model number WED5100HW1
Hello George, Thank you for your inquiry. This is the motherboard of the appliance and coordinates the functions of the dryer. If your dryer is not starting, we would recommend checking the thermal fuse (which trips and keeps the dryer from starting if it has overheated), the high limit thermostat and thermal cut off kit, and the internal bias thermostat. We also recommend checking the wiring for any visible damage. Good luck with your repair.
Hi John, thank you for reaching out. According to our research, the E2F2 error indicates a problem with the keypad control. First, try resetting the dryer by turning the power off for a few minutes and then turning it back on. If the problem persists, you may need to check the control panel, part number PS12745525, as it is most likely faulty. We hope this helps!
Dryer will get stuck in sensing mode before starting and will also stop drying but the screen says it’s still drying
For model number WED5100HW2
Hi Ben, thank you for reaching out. Based on our research, we would suggest checking the moisture sensor first. If it is fine, the issue could be with the control board, part number PS16543592. It manages the functions of the dryer such as drying time and temperature. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16543592
Manufacturer Part Number: W11525997