![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
CNTRL-ELEC
$482.05
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number
PS16543592
Manufacturer Part Number
W11525997
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Kenmore.
Part# W11525997 replaces these:
W11400354, W11413572, W11496630
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
November 26, 2021
Does this part keep the dryer from turning on, not getting any power to control board.
For model number WED5100HW1
Hello George, Thank you for your inquiry. This is the motherboard of the appliance and coordinates the functions of the dryer. If your dryer is not starting, we would recommend checking the thermal fuse (which trips and keeps the dryer from starting if it has overheated), the high limit thermostat and thermal cut off kit, and the internal bias thermostat. We also recommend checking the wiring for any visible damage. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
John
June 1, 2023
My dryer has a code e2f2 what part will fix this
For model number Wed5100hc
Hi John, thank you for reaching out. According to our research, the E2F2 error indicates a problem with the keypad control. First, try resetting the dryer by turning the power off for a few minutes and then turning it back on. If the problem persists, you may need to check the control panel, part number PS12745525, as it is most likely faulty. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Ben
April 29, 2024
Dryer will get stuck in sensing mode before starting and will also stop drying but the screen says it’s still drying
For model number WED5100HW2
Hi Ben, thank you for reaching out. Based on our research, we would suggest checking the moisture sensor first. If it is fine, the issue could be with the control board, part number PS16543592. It manages the functions of the dryer such as drying time and temperature. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16543592
Manufacturer Part Number: W11525997
Manufacturer Part Number: W11525997
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)