Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patricia
October 12, 2023
I’d the drain pump difficult to install?
For model number KDFE204KPS2
Hi Patricia, thank you for your inquiry. We are providing you with some instructions that might help you in replacing this part:
1) Unplug the unit and disconnect the water supply.
2) Unthread the mounting screws securing the lower access panels. Remove the outer panel along with the inner panel and the insulation.
3) Unthread the screws holding the terminal box and take it out.
4) Disconnect the drain pump wire connector, depress the retaining lever and rotate the old pump counterclockwise to detach it.
5) Now, install the new part by aligning it with the sump. Rotate it clockwise to lock it into place and reconnect the wire connector.
We hope this is helpful!
Was this helpful?
Thank you for voting!
Patricia
October 12, 2023
Will the drain pump W11462456 fit this model. Is this an installation that a homeowner can manage easily?
For model number KDFE 204 KPS2
Hi Patricia, thank you for your inquiry. The drain pump you mentioned fits your model. We have attached some relevant instructions that might help you while installing the drain pump. You just need to unplug the unit and disconnect the water supply. Un-thread the mounting screws securing the lower access panels. Remove the outer panel along with the inner panel and the insulation. Un-thread the screws holding the terminal box and take it out. Disconnect the drain pump wire connector, depress the retaining lever and rotate the old pump counterclockwise to detach it. Now, install the new drain pump by aligning it with the sump. Rotate it clockwise to lock it into place and reconnect the wire connector. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16218089
Manufacturer Part Number: W11462456