Part Videos
Replacing your Frigidaire Dishwasher Lower Spray Arm Support
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy | Leaking | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Gibson.
Part# 5304518968 replaces these:
154252101, 154292901, 154294101, 154294102, 5304506515
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
David B - August 18, 2022
Verified Purchase
Working
Not much to say but that it works.
David S - June 19, 2022
Verified Purchase
New spray arm
All three parts fit perfectly
Catherine B - February 18, 2022
Verified Purchase
exactly what I needed.
exactly what I needed.
Stephanie B - November 22, 2021
Verified Purchase
Great service
Service was great - easy and fast delivery.
Andrey T - August 7, 2021
Verified Purchase
Perfect fit!
Quick delivery, part was identical to the one we lost (other than colour but that doesn't matter). Very happy with PartSelect!
Patricia G - January 28, 2021
Verified Purchase
Great service
Arrived on time. easy to find part on line.
Ivan S - October 13, 2020
Verified Purchase
Easy fix!
Part fit just like factory. Thank you
Molly C - August 19, 2020
Verified Purchase
great
Works fine
Jim B - June 29, 2019
Verified Purchase
Exact Replacement Part
Quick delivery and good price.
Elsa G - May 8, 2019
Verified Purchase
easy assemble
works good
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 8 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
spray arm fell off and melted on element
The Spray arm and the support had come off during operation and subsequently melted on the heating element. This was our fault, as a knife had slipped through the lower dish-rack and acted as a ramp to launch the spray arm as it came around. The support was a simple 1/4 turn counter-clockwise until it clicked into place, drop the strainer basket into position around the support, them push the spray arm into place until the catches snap over the retaining ring molded into the support. All told, about 10 minutes, max.
Other Parts Used:
-
Dale from Worley, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
35 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Spray Arm Dislodged and melted
Ordered the parts off of your catolog selections and snapped everyting into place. Thanks for making it that easy.
Other Parts Used:
-
Dan from Cabot, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 parts melted on the heating element
-
linda from LEEDS, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm support vibrated out, melted lower spray arm.
Grab the tab on the support and rotate 1/4 turn counter-clockwise to unlock it, then lift it off. The lower spray arm simply pops off the support by spreading two tabs underneath.
Align the opening in the lower spray arm support with the outlet post in the bottom and rotate 1/4 turn clockwise to lock.
*Note: direction to remove the filter basket differed from the manual. Visually line up the notches and do not twist too far when locking or you WILL break the retainer tabs.
Simply center the lower spray arm over the support and press down until it locks into place.
Align the opening in the lower spray arm support with the outlet post in the bottom and rotate 1/4 turn clockwise to lock.
*Note: direction to remove the filter basket differed from the manual. Visually line up the notches and do not twist too far when locking or you WILL break the retainer tabs.
Simply center the lower spray arm over the support and press down until it locks into place.
Other Parts Used:
-
Craig from HAWLEY, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm came off and melted mon heating element
Takes longer to open the machine and remove the lower basket than to do repair.
Snap arm and support together, align and twist in machine to lock in place.
Save yourself some time and buy the support. High risk it can be broken while being removed from the arm. I am glad I purchased a new one and didn't take the risk.
Snap arm and support together, align and twist in machine to lock in place.
Save yourself some time and buy the support. High risk it can be broken while being removed from the arm. I am glad I purchased a new one and didn't take the risk.
Other Parts Used:
-
Sandra from WILDERSVILLE, TN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
PARTS ORDER TOOK TOO LONG TO ARRIVE
The repair was not the problem. The problem was getting the parts I ordered. When the parts finally shipped I had to wait for them because they just sat in a FedEx shipping warehouse for about a week delaying the repair.
Other Parts Used:
-
LUKE from MARIETTA, GA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts internally came apart and could not get back together
Took out the old parts and put the new ones back in the exact same way as the old ones came out.
Other Parts Used:
-
Terry from LAKE STEVENS, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing bottom spray arm
I used the PartSelect repair video online to show me how to fix the dishwasher. I needed a spray arm and support. Excellent video made the repair quick and easy.
Other Parts Used:
-
Ashley from Normal, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frances
April 28, 2023
The base where the lower spray arm sits should it be fixed in position or should it be movable'
For model number FDB2000RFC0
Hi Frances,
Thank you for your question. The spray arm support should be stationary. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12712289
Manufacturer Part Number: 5304518968
Manufacturer Part Number: 5304518968
Brand
Model Number
Description