Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# 388253A replaces these:
285595, 285715, 388253, 62610, 62678, 62679, 62848
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Francine C - June 13, 2019
Verified Purchase
Never seen a great service like that!
Parts were here in 2 days. Price was OK, I saved about $200 repairing my transmission. Washer is back in service in no time. Tks for you great service!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.1 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Agitator had a terrible ratcheting sound when running in free-wheel mode during spin cycle.
Removed the gearbox from the drum and removed the direct drive motor from the gearbox. Disassembled gearbox and drained gear oil. Rebuilt the neutral drive assembly with the ordered parts. Cleaned sealing surfaces. Filled gearbox with new gear oil. Sealed and re-installed the top cover to the gearbox. Reattached motor and then reinstalled assembly to drum and clutch (installed new clutch lining at this time as well).
Other Parts Used:
-
Adam from Lehi, UT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
96 of 121 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washing machine will agitate but not spin
I removed the cabinet and agitator, layed the machine on it's back, removed the pump, motor and gearcase. I found a way to prop the gearcase up so it rested level, removed the cover, drained the old oil. I removed all internal parts, disassembled them and cleaned them. I reassembled the gearcase using the new uetral drain assembly, and replaced the oil. I made sure the brake assembly was pushed into position and then put the gearcase, motor and pump back in. I sttod the machine up, put the cabinet back on and tested the machine. It still did not spin, so it wasn't the coupler, clutch or nuetral drain assembly.
Other Parts Used:
-
Robert from Manchester, CT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
14 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 14, 2019
Does this kit come with #25 (plastic circular gear)? Thanks!
For model number Wtw5300vw2
Hello John, thank you for your question. No, the item# 25 does not come with the kit. It has to be ordered separately, or by ordering the gearcase assembly. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
November 17, 2019
Hi, my machine didn’t agitate strong enough but it spin and drained well. I had replaced motor coupler and clutch assembly but agitation is still weak. I can even turn the agitator unit by hands during agitation. I notified some clicking noise possibly from gear box during agitation. I took a part the gear box but by looking, it seemed fine. I’m trying to understand what cause the noise and weak agitation? If i can replace the neutral pak , would it help? Thanks, john
For model number Wtw5300vw2
Hello John and thanks for writing.
Have you checked the little agitator clogs # PS388034, make sure they are not missing or broken.
Replacing the neutral pak might help but it is not usually the cause of this. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12710526
Manufacturer Part Number: 388253A
Manufacturer Part Number: 388253A
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts