DOOR LATCH AND SWITCH ASSEMBLY
Fits your LDF5545BD!
$102.60
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your LDF5545BD!
PartSelect Number
PS12588938
Manufacturer Part Number
AGM76149901
Manufactured by
LG
Troubleshooting
This part works with the following products:
Kenmore, LG.
Part# AGM76149901 replaces these:
AFK73909602
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
LG Electronics LDF 554# door switch operated intermittently and sometimes failed to start the washing cycle, giving a 4,3,2,1 countdown display. Door switch (located exterior, top front of the assembly) has two micro switches which tested fine, however a mechanical plastic part with heavy spring wo
Part Replacement: Repair was quick and easy, requiring small Phillips screw driver, multimeter, flashlight/light source, (gloves and safety glasses optional). Steps:
1. Turn off power to dishwasher at breaker box.
2. Remove any screws securing DW to cabinet and slide out DW (about 12-18 inches) to expose switch (located on the very top exterior front).
3. Remove thin plastic cover sheet held in place by one Phillips screw.
4. Test for ac power or if unsure about turning off DW power.
5. Unplug two wiring assemblies (left and right side of old part).
6. Remove two small Phillips screws holding part to DW. (Tip- put a large towel/drop cloth down below screw location to catch screws should they fall.)
7. Manipulate the old part out (jiggle, twist, slide backwards, etc.)
8. Install new part and follow above instructions in reverse order.
9. Test DW.
Hope these instructions are helpful. Best of luck on your project!
1. Turn off power to dishwasher at breaker box.
2. Remove any screws securing DW to cabinet and slide out DW (about 12-18 inches) to expose switch (located on the very top exterior front).
3. Remove thin plastic cover sheet held in place by one Phillips screw.
4. Test for ac power or if unsure about turning off DW power.
5. Unplug two wiring assemblies (left and right side of old part).
6. Remove two small Phillips screws holding part to DW. (Tip- put a large towel/drop cloth down below screw location to catch screws should they fall.)
7. Manipulate the old part out (jiggle, twist, slide backwards, etc.)
8. Install new part and follow above instructions in reverse order.
9. Test DW.
Hope these instructions are helpful. Best of luck on your project!
Other Parts Used:
-
Jack from Ellicott city, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace door latch
Took it out and replaced.
Other Parts Used:
-
Toni from EASTON, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
February 17, 2020
How do you test this part agm76149901 or p12588939 and will this part stop your dishwasher from powering on?
For model number Ldf5545st
Hello and thank you for writing.
This is the latch assembly and safety switch, yes if the dishwasher is not powering on this part could be responsible for it. You would need to test this part with a multimeter for continuity. We hope this helps. Please contact us anytime if you require further assistance.
3 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12588938
Manufacturer Part Number: AGM76149901
Manufacturer Part Number: AGM76149901
Brand
Model Number
Description