Product Description
IGNITOR KIT, HALF SHEILD Specifications
This is an OEM broil igniter, which works with ranges.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 5303935059 replaces these:
139013700, 316428601, 316489401, 7316489401
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Donnie C - January 19, 2022
Verified Purchase
Fast Delivery, great customer service.
With just a few days before Christmas I found myself in need of a small but essential part in order to heat up my oven. On Sunday evening I called Part Select and had the needed part in my hand Tuesday morning. We were able to have turkey after all.
Greg P - February 19, 2020
Verified Purchase
Great Part
The part ordered arrived when expected and was relatively easy to install. Unfortunately, it did not resolve the problem we’re experiencing with our gas oven (not maintaining programmed heat).
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace igniter
New part needed to be spliced to old connector with porcelain wire nuts then removed lower oven drawer to access the connection for igniter
Other Parts Used:
-
Edward from NORWOOD, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter failing to energize even though there was 120 volts being supplied.
Slide Range away from wall, unplug Range, remove rear cover (4) screws, removed burner assembly (5) screws, unplugged Igniter connector, loosen Igniter bracket, remove Igniter (2) screws. Reverse process to install new Igniter. I also wore latex gloves to prevent touching graphite portion of Igniter. Tested Broiler for operation, slid Range back into position. All good.
Other Parts Used:
-
Richard from MERCERVILLE, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brent
26 days ago
does this stove have 2 igniters one for the oven and one for the broiler if so if ones goes bad does it stop the other from working
For model number plgf390dce
Hi Brent, thank you for the question. Yes, your model comes with 2 igniters for the oven. The bake igniter for your model is part number PS1528534, and the igniter kit for the broil element is part number PS12584919. If one igniter goes bad, it does not stop the other from working. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12584919
Manufacturer Part Number: 5303935059
Manufacturer Part Number: 5303935059
Brand
Model Number
Description