COVER-MODULE GREY
$78.07
On Order
PartSelect Number
PS12364142
Manufacturer Part Number
241679009
Manufactured by
Frigidaire
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire.
Part# 241679009 replaces these:
AP6278281, 241679008
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
March 27, 2023
The bottom horizontal part of the dispenser door trim is broken. How do I remove the unit to replace it? The part I need is #241679003 in gray.
thanks
David
For model number LFSS2612TFO
Hello David, thank you for reaching out. We have found relevant instructions for you to replace the dispenser trim, part number PS12364142, for your model. They may not be of the exact same model but they will help you with the installation. You may follow the following steps to replace the trim:
1. On the bottom of the display are two locking tabs holding it in place, insert a flat blade screwdriver into the slots and gently push up and pry it towards you to release them.
2. Now slide the display down carefully and disconnect these three electrical connectors.
3. Remove the wires and water lines from the retainers.
4. Next, remove these three screws with a quarter-inch nut driver and disconnect the electrical connector on the right side then pinch these two retaining tabs towards each other to release the ice chute door from the fridge and slide it towards you.
5. Now, remove the drip tray by lifting it up on the front and pulling it out.
6. Remove the screws with a quarter-inch nut driver then gently pull the dispenser shield away from the refrigerator.
7. To remove the trim, gently pry on the tabs with a flat-blade screwdriver. Start at the top tab and work your way down alternating between sides then separate the shield from the trim piece.
We hope this information is useful!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12364142
Manufacturer Part Number: 241679009
Manufacturer Part Number: 241679009
Brand
Model Number
Description