Product Description
GEAR-HUB Specifications
Use with stand mixers.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# W11192794 replaces these:
AP6329541, 4159643, 4161403, 4161405, 4169820, 9703905, 9703907, 9705130, 9709627, W11175138, W11175140, WP9705130, WP9709627
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
John Z - October 28, 2023
Verified Purchase
Fit , works great
Part was perfect fit.
Duane B - December 8, 2022
Verified Purchase
easy repair with diagram supplied with the part.
Shipping was fast, part was new, installed and working great. PartSelect is a great place to shop.
Nathan L - November 17, 2022
Verified Purchase
Fast shipping, easy installation.
This part came very quickly and was exactly what I needed to repair my wife's mixer. Thanks for the great service.
Darryl V - September 21, 2022
Verified Purchase
Perfectly described and delivered as promised.
Repair was relatively easy, even for an amateur handy person. Saved a lot by not having to buy a new unit!
Abdelkader L - July 21, 2022
Verified Purchase
Easy repair. Very happy
Very good conditions and your cooperation is very appreciable. Thanks a lot
Richard S - February 10, 2022
Verified Purchase
worked as expected so far anyway.
The part arrived in good condition and went into the body very nicely. The instructions were great you do not see that happen to much any more. Great job of caring for your customers and your business.
Brad J - October 14, 2021
Verified Purchase
Easy repair, great part!
The gear hub installed easy. Arrived within 2 days. Macine runs like brand new.
Kerry H - September 12, 2021
Verified Purchase
Exact replacement
Just what I needed. It was just a little unclear that this part was actually both pieces that are needed.
Meisheng X - February 12, 2020
Verified Purchase
great part, and easy to install
the part is in great condition, shiny. it delivered very fast, I got the part next day, beyond my expectation.
Mike G - February 1, 2020
Verified Purchase
Very easy repair.
Showed very quickly. got the mixer up and running again with no issues. Great place to get parts.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 7 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No action for the attachments for cutting/chopping.
I removed the rear cap, decorative strap, and decorative ring. Next I drove out the pin holding the mixing head. I then removed the 9 screws holding on the motor/gearing portion. This facilitated removal of the gearing from the motor assembly. I next laid in the new gears and calculated what thickness of fiber washers were needed to hold the gears in place. Reassembly was in reverse order of dissassembly.
Other Parts Used:
-
David from Goodlettsville, TN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
44 of 68 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Attachments would not work, spindle turned erratically, with no power
Punched out the roll pin to remove eccentric from spindle, undid 5 screws (after removing trim ring), and removed 4 screws to undo the motor housing. Make sure to keep the one screw with a lock washer in the BACK of the housing. Undid the screw on top to remove the back of the motor housing to take out the strain relief grommet, prior to removing the motor housing. Scraped the excess grease into a tub to re-use. Pulled out the shaft, and lifted out the old (stripped) gear and plopped the new one in. Make sure to mark match points for parts, and put the pins back in in the right order. You have to put the 5 screws back in before sliding the trim ring on, and putting the roll pin back. make sure all gears mesh and test before snugging the motor housing screws. Be sure to orient the strain relief grommet securely, and be careful of the filter plates in the back of the housing (they're brittle). putting the grease back is like frosting a cake. Save a little for the planetary ass'y.
Other Parts Used:
-
Kerry from Sherwood, OR
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spent Pevel Pinion Center Gear
remove the back cover part # 36, remove the top cover part # 1 (by removing the chrome ring parate # 28, the mobile disk part # 25 and six screws part # 24). This done, remove the system parat # 38 to release the Pevel Pinion Center Gear part # 15 and remove the damaged part and put the new part. The install the removed parts in reverse order as they withdrew.
Other Parts Used:
-
EUGENIO from MIAMI, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Attachment hub stopped spinning
Used youtube movies to disassemble the mixer and found that the gear was stripped. I kept the screws in labeled ziploc baggies so I wouldn't forget which screws went where. Once the part arrived, it was very simple to replace the gear. I regreased the mixer and then reassembled. The trickiest part was how greasy everything was! It was also hard to get the pin through the beater hub - I found a video that suggested using a very slim screwdriver to thread the hole before inserting the pin. This was the most involved part replacement I've done on my own, and it was very satisfying to get my mixer back in working order!
Other Parts Used:
-
Sarah from GRAPEVINE, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
EXTRUDER GEARS GROUND DOWN AND STOPPED WORKING
Dismantled the mixer, took photos, and re-assembled unit.
Other Parts Used:
-
Matthew from MILWAUKEE, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Decorative plug at top of mixer fell into the bowl and jammed the mixer stripping gears
Watch U Tube video. Take care to keep track of disassembly. Hard part was to have 4 types of screw drivers to fit the different screw heads. Be sure to clean broken gear clogs out of the grease. Parts select lady was a great help. Download Parts select diagram for extra help. Time and patience!
Other Parts Used:
-
BRIAN from PALISADE, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer was making a loud noise and the attachment port was not working
-
steve from OWASSO, OK
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adrien
March 9, 2020
Does this piece include piece. 9703905 and 9703907. Thanks Adrien
For model number Ksm120mc
Hello Adrien, Thank you for the question. Yes, the PartSelect Number PS12348885 includes both the 9703905 and 9703907. We hope this helps.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Jarvis Burian
February 13, 2020
I need a hug gear for the above mixer. Which one is the right one the part # ps12348885, or ps12348886.Will either one work? Thank-you for your time.
For model number 4kp26m1xga5
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Hub Gear (Part# PS12348886).
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
September 13, 2021
Is part # w11192794 both the parts 10 and 11 in the figure? Also do you have the small square screwdriver, bit that fits the 4 screws that hold the cover on? Finally is K45SSOB the same as K45SSOB0? Thanks for your help, Tom
For model number K45SSOB
Hello Tom, Thank you for the question. The Gears #10 and #11 come together now as a Kit, Part #: PS12348885. We do not carry the tools sorry and K45SSOB0 and K45SSOB are the same model. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Karma
November 18, 2019
The only part number i found was 9703907, that part is good and is for the attachments. What i’m looking for is the bottom gear below the pin. For the mixer.
For model number Kitchen aid 6qrt 575 watt architect stand mixer
Hello Karma, thank you for your question. There are a few gears for these units, but without the exact model number we are unable to verify they are compatible. They are Part #: PS12347634, worm gear PartSelect Number: PS11748374, shaft and pinion PartSelect Number: PS11740499 and worm gear and pinion PartSelect Number: PS11740516. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Heather
December 22, 2019
As per the diagram is this part 20 and 21?
Hi Heather, you are correct, this is part 20/21 in the supplied diagram. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Don
March 20, 2018
What is the shaft diameter of this part. The opening on my mixer is 1" the gear shaft diameter should be 1 inch with a length of ? Does this part match these dimensions?
For model number KSM150PSCV
Hi Don,
Thank you for your question. Unfortunately the manufacturer does not give us specifications on their parts. This parts shaft is approximately 3/4's of an inch wide, and a little over an inch long. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Don
March 20, 2018
Do you have this part with a 1 inch diameter shaft?
For model number KSM150PSCV
Hi Don,
Thank you for your follow up question. Unfortunately no but according to your model number it does look like this one is supposed to be the correct part for your appliance. So it should work according to KitchenAid. So at the very least we can guarantee it will be the correct part because it matches underneath your model number. I hope that helps Don. Good luck with your repair.
Was this helpful?
Thank you for voting!
Kathleen
April 5, 2022
Is this the correct part for my mixer?
For model number ksm150pspk
Hello Kathleen, Thank you for your inquiry. We have researched the model number you have provided and confirm that this is the correct part for your model. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Frank
December 26, 2022
My mixer quit working although the motor runs at any speed the paddle will not turn. I guess it needs gears. Cannot find right parts
For model number ksm150psga
Hi Frank, thank you for reaching out. If the motor on your mixer is working but the mixer is not operating, it could indicate a defective worm gear, part number PS11748374. We also suggest that you check the gear hub, part number PS12348885. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12348885
Manufacturer Part Number: W11192794
Manufacturer Part Number: W11192794
Brand
Model Number
Description