Part Videos
Replacing your Whirlpool Washer Hot Water Valve
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore.
Part# W11168743 replaces these:
AP6327638, W10240948, W10921515, WPW10240948
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Norm B - January 17, 2022
Verified Purchase
Very satisfied
Part was exactly what I needed, thanks to the parts department being very helpful. I received the part on the day that he indicated. Works perfect. Thank you
Robert A - January 9, 2022
Verified Purchase
Right Part to fix leaking hot water inlet valve
It was the right part and was shipped immediately, unfortunately Purolater was very slow (almost 2 weeks) to deliver.
Franki V - May 27, 2021
Verified Purchase
Parts are always exceptional
Part was an exceptional replacement piece, all parts from partselect are of the highest quality. I placed my order around 2pm on a Monday afternoon and by the time I woke up on Tuesday morning it was already at my house!
JERZY N - August 16, 2020
Verified Purchase
Proper part. Quick repair. No more leaking.
Part came in 3 days. The Washing Machine is working again.
Bill O - August 15, 2020
Verified Purchase
Great part, fast shipping
Ordered part and recurved it 2 days later. Installation video was very helpful and easy to understand.
Ranvear B - April 14, 2020
Verified Purchase
Good video to replace valve
Repair video made it easy to replace the hot water valve inside the washing machine.
Jim S - February 4, 2019
Verified Purchase
Correct part. Easily identified on site.
Works great.problem solved.
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adam
April 22, 2018
Washer leaked under hot valve intake and runs down back of second silver panel in back. It does not leak around where water comes into valve and hose area. Could it be intake valve needing replacement?
For model number WTW5640XW0
Hi Adam,
Thank you for your question. I would say probably yes. The only other thing I would suggest checking are the hoses that go from your valve into the dispenser drawer. Just to double check everything. I hope that helps. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Joey
May 7, 2019
Water drips inside tub when washer is not in use.
For model number wtw5500xwo
Hi Joey,
Thank you for your question. If you have water dripping inside your washer when it is not is use, the issue would be one of the water inlet valves and one of them will need to be replaced. The part numbers listed under your model number for both the hot and cold water inlet valves are PS12348074 and PS12348073. You will need to check the valves to see which one is causing the issue. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
September 10, 2019
My washer has started leaking, apparently at the detergent fill valve. Is there a replacement set for all the solenoids, or is there a specific one that i can order? And/or, is there something else i can check before ordering parts?
For model number MVWX700XL1
Hi Dave, the solenoids are part of this part W11168740. Check to make sure the washer is level. That the fill hoses are attached tightly. Make sure that the fill hose flat washers are properly seated, Check all of the plumbing for leaks and that the washer is loaded properly.Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
January 18, 2019
Water drips inside drum when washer is not running gotta keep the hose valves close could this be the issue
Hello Ken, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Mike
February 4, 2023
I’m looking for the screen that goes in the hot water valve inlet, the valve is good, I just need a new plastic screen that fits inside inlet of valve, is it available?
For model number MVWX655DW1
Hi Mike,
Thank you for your question. The part number listed under your model number for the hose washer kit is PS1803069. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12348074
Manufacturer Part Number: W11168743
Manufacturer Part Number: W11168743
Brand
Model Number
Description