Part Videos
Replacing your Whirlpool Dishwasher MOTOR-PUMP
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Will Not Start | Leaking | Will not fill with water
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Jenn-Air.
Part# W11032770 replaces these:
AP6039091, W10349483, W10440715, W10510667, W10529163, W10816492, W10864037, W10885542, WPW10529163
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Mark W - November 21, 2021
Verified Purchase
easy install
The pump was easy to install with the instructional video (though, I forgot to drain the sump pit area inside the dishwasher, leading to a mess). The packaging was underwhelming and arrived damaged, which concerned me, but the pump appears to have been fine. NOTE: they sell this pump for less as part of a set that includes several other parts!
Kostiantyn K - December 11, 2020
Verified Purchase
Everything worked and saved me over $100
Dishwasher repair guy said part would be hard to find. A few clicks later I found it on Part Select for $130 less than quoted through the distributor and in stock. Part shipped quickly and dishwasher works now... Very happy! Thank you.
Brent C - September 17, 2020
Verified Purchase
Fairly easy repair.
Video on this website that shows the motor repair was very accurate and helped a lot. My dishwasher was filling, draining, but would not do anything else. I checked that all the spray nosels were not plugged and decided (based on the symptoms from the website) that it was the motor. I suspect my motor might have failed prematurity because of the hard water in our area. Just a word of caution.
Jessica M - September 10, 2020
Verified Purchase
Easy to replace
Easy to replace failing pump. Would run intermittently but then stall. Hard to diagnose but this fixed it!
Daniel Q - May 12, 2020
Verified Purchase
Easy repair & correct part
Pump was exact match to the one removed & bonus was it came with a new clamp . Fast delivery , like 3 days to the post office . I would definitely use partselect again!
Cari G - May 1, 2020
Verified Purchase
First successful appliance repair
This part solved my problem of having my dishwasher intermittently running through an entire cycle without spraying any water. It now works every time. Getting the old assembly out was more difficult in real life than it was in the video, but that's not the part's fault.
Paul B - January 11, 2020
Verified Purchase
Whirlpool dishwasher circulation pump
Parts person was very helpful finding correct part. It was complete making installation quick and easy
Daniel B - January 1, 2020
Verified Purchase
Correct part
The Repair went really well it was the correct part and very easy to install. Dishwasher running like new
Bryon W - May 24, 2019
Verified Purchase
Simple repair, low price, fast delivery.
Very happy to have found Part Select. This part cost considerably less than the repairman was going to charge plus it was great to not have to pay for the labour to install. The video was easy to follow and made installation a breeze! Saved me from having to replace an otherwise perfectly good dishwasher. Was also pleasantly surprised to receive the part in only one day!
Paul W - March 11, 2019
Verified Purchase
Right part, excellent video
Not happy about buying a $200 motor for a barely 3-year-old dishwasher but at least the PartSelect made the repair process easy.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
wash pump stopped working
change out the old pump with new one actually quieter running pump awesome
Other Parts Used:
-
christopher from MOSES LAKE, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jonathan
May 16, 2019
My dishwasher fills up with water and sounds like it is working for a few minutes, but then stops making noise until it drains. The water is hot, the soap dispenses, but just sits on the bottom of the tub. The dishes are not clean at the end, but they are wet. Would this be the correct part to replace?
For model number 665.13099N4212
Hello Jonathan, thank you for your question. Yes, it sounds like water is not being circulated through the unit to turn the spray arms and wash the dishes. We would recommend replacing the circulation pump/motor PartSelect Number PS11773089. Good luck with your repair!
23 people found this helpful.
Was this helpful?
Thank you for voting!
Galen
February 6, 2018
Will fill with water but will not go through spray arms drains fine is it the motor/pump
For model number KDFE104DBL0
Hi Galen,
Thank you for your question. If the water is not going through the spray arms, there are some parts that you will need to check to see which one is causing the issue. You will need to check the filter, the turbidity sensor, the heating element, the push-in retainer clip, the water inlet valve, the motor pump, the pump, the spray arms and the drain hose. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Barb
March 9, 2018
Is there a video on changing the motor pump
For model number Wdf760sadm1
Hi Barb,
Thank you for your question. There is a video on our website that you can reference on how to install the pump. The dishwasher in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS11753379. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chad
November 16, 2017
I have water entering the dishwasher but it does not seem to be making pressure. I do not hear water going through the spray bars. It drains fine. Could this be the motor/pump or the motor?
For model number WDT920SADE1
Hello Chad,
Thanks for your question. The motor and pump assembly is the more likely cause for your issue. It can also be a good idea to examine the water inlet valve, part number PS11752927, to check if that is intact.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Luwan
December 28, 2017
Dishwasher wont drain
For model number KDTE104DSS0
Hi Luwan, Thank you for the question. The most common part replaced if it is not draining would be the drain pump, PartSelect Number PS11753379.Here is a link to the video on how to do the repair. Hope this helps!
https://www.youtube.com/watch?v=LRTH3Wq_Apw
2 people found this helpful.
Was this helpful?
Thank you for voting!
Domenic
April 8, 2018
Water will not enter machine. Water valve is open. It did pump last load of water out. It will run through all cycles. Had a service man out who said it was the motor. Is it the diverted motor, or motor and pump? Unit is 4 years old.
For model number KDFE104DSS0
Hello Domenic, thank you for your question. If the unit is not pumping water through the unit, but is filling and draining you should replace the MOTOR-PUMP W11032770. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Julie
April 4, 2019
Im not exactly sure what's happening with my dishwasher. The inside of the tub is always dirty and my kids always say that the cups smell like throw up. Nothing seems to be getting clean. Ive had to manually clean out the dishwasher from black sludge. Its pretty nasty. I paid 700 for this machine and its been nothing but a pain. Ive had 3 repair s for it and and never had it actually working properly. Please help me!
For model number KDTE204ESS3
Hello Julie, thank you for your question. We would recommend removing the filter PartSelect Number: PS11759673 and screen PartSelect Number: PS11755148 and cleaning them well. You may also want to remove the spray arms and clean them well. Reassemble the unit and run a cycle with vinegar and water. If that doesn't clean the smell, you may want to replace the circulation pump, sump and the hoses. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
ALLEN
September 10, 2019
The machine drains. But it does not wash. Which pump would it be ?
For model number WDF750SAYM3
Hi Allen, If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. If it is a motor it likely would be the pump motor. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
June 21, 2022
Are your parts genuine OEM parts?
For model number KDTE204ESS1
Hello Mark, Thank you for the question. All the parts we sell are brand new OEM parts direct from the manufacture. We never sell used or after market. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Additional Links:
Stephen
August 23, 2022
Does this pump heat the water as it circulates it?
For model number wdf760sadm2
Hello Stephen, Thank you for contacting us. The circulation pump only circulates the water to the spray arms. For the model number that you have provided, the heating element would actually help to heat the water, but you should still make sure there is hot water flowing into the dishwasher from the fill hoses. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11773089
Manufacturer Part Number: W11032770
Manufacturer Part Number: W11032770
Brand
Model Number
Description