CUTOFF-TML
Fits your YIED4771EW0 Dryer!
$76.75
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your YIED4771EW0 Dryer!
PartSelect Number
PS11769432
Manufacturer Part Number
W10900067
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Crosley.
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My dryer quit blowing hot air
I searched YouTube for videos and found one that related. I did the common checks on "fuses" and found one that was open. I ordered the part(s), it came with an extra piece, and it was easy to replace and wasn't that expensive. I had to take off the back panel but after that it was one screw for the part, connect 2 spade terminals. and re-attach the back panel. The part I replaced was the thermal cut-off fuse and it blew because the lint trap was clogged.
Other Parts Used:
-
Russell from WOODBURY, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Matt
December 19, 2018
Hello - i have two questions. 1) is this the part that is located at the top of the blower housing, above the heating element and high limit thermostat (on the same side)? 2) should i have continuity through this part?My dryer starts and runs but is not heating. i have tested the heating element, thermal fuse, and high limit thermostat and have continuity through each of those. i suspect this is the culprit but want to make sure i order the correct part.
thank you.
For model number WED49STBW1
Hi Matt,
Thank you for your question. This part is located at the top of the box heater. The part should show continuity. Set your multimeter to the R X 1 setting. Take each of your meter's probes and touch one to each terminal. You are testing for continuity, and you should receive a reading of either zero or infinity. At room temperature, testing the thermal fuse should produce a reading of zero. But if a thermal fuse is tested when it is heated to its limit, a reading of infinity should be produced. We strongly recommend that you test your thermal fuse at room temperature. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
LOUIS
May 10, 2023
Should I be able to read continuity across the terminals on the CUTOFF-TML
?
For model number MEDC465HWO
Hello Louis, thank you for contacting us. A working thermal cut-off fuse, part number PS11769432, should have continuity when checked with the multimeter. If it does not have continuity, that means the thermal cut-off fuse is faulty. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ruth
October 10, 2023
Dryer heats will not cut off. Cuts off if you open door or turn knob to off
For model number MEDC465HWO
Hello Ruth, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the thermal cut-off fuse, part number PS11769432, to fix the problem. It shuts off the heat if the dryer overheats. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Eddie
April 17, 2024
Hello. Your Cutoff TML W10900067 shows two items in the picture and I was wondering if in fact one receives both of these or just the TML cutoff switch. Thanks
For model number WED49STBW1
Hi Eddie, thank you for reaching out. Based on our research, the thermal cut-off fuse kit, part number PS11769432, you have mentioned, includes the two items, the thermal cut-off fuse and high-limit thermostat. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11769432
Manufacturer Part Number: W10900067
Manufacturer Part Number: W10900067
Brand
Model Number
Description