Part Videos
Replacing your Whirlpool Dishwasher Dishrack Roller Assembly
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, Amana, Maytag.
Part# W10888592 replaces these:
AP6036019, 8575281, W10845760, WP8575281
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Peter D - March 16, 2023
Verified Purchase
Right part, works well.
Back up and working.
Marba T - March 2, 2023
Verified Purchase
Easy repair
When I was buying the part, it appeared you would get two, that’s how the pictured showed the part. However, upon receipt I got two pieces instead of the four I thought I ordered. Pretty pricy for a small piece of plastic.
Dino P - June 7, 2019
Verified Purchase
Excellent. Product
Excellent quality
Luc L - February 25, 2019
Verified Purchase
overpriced
at that price i taught it was for 4 units :-( no it was for 1
Luc L - February 25, 2019
Verified Purchase
Right part but..
Overpriced
JAMIE J - December 28, 2018
Verified Purchase
Easy repair, good customer service, came broken
The part came broken, was able to purchase new part and had great customer service, only thing I’m mad about is that I had to pay for shipping of new part even though it was not my problem with part broken inside unopened bag. Part worked(once came not broken) as described. Dishwasher fixed.
December 28, 2018
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
These 3 parts were broken or missing.
I had to watch a You Tube Video and the Repair was basically snapping these parts on the rack and glide. No tools needed!
Other Parts Used:
-
Sally from COCHRANVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing upper rack rollers
Followed very simple instructions to easily install. The only tool needed was a flathead scredriver to pop off caps to remove old, broken rollers. New rollers simply click into place. Piease aren't cheap, but significantly less than a new dishwasher.
Other Parts Used:
-
Tahir from ARLINGTON, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
November 11, 2017
Upper rack roller assembly in parts diagram part 2 shows 2 each is needed, is this a repair kit for one side ? I need for both sides so what do i order and how much will this cost? Thanks kenneth
For model number DU1015XTXB5
Hi Kenneth,
Thank you for your inquiry. The roller assembly is sold individually and they are not sold in a kit. If you need 2 for each side, you will need to order 4 in total. The cost for 4 roller assemblies would be $119.48 plus shipping. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Caroline
October 4, 2017
How many assembly rolls come with this part?
For model number DU1055XTSB3
Hi Caroline,
Thank you for your question. The roller assemblies are sold individually. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Veronica
April 8, 2018
How to replace dishwasher roller that controls bottom shelf from closing
For model number 66512789K310
Hi Veronica,
Thank you for your inquiry. To change this dishrack roller assembly you have questioned on: Pull the upper rack out and use a screwdriver to release the front rack stops from the upper dish rack rails. Slide out the upper rack out and use a small flat head screw driver to push the tab on the roller out so you can release the retaining latch securing the old assembly. Now release the brackets from the tines to fully detach. Install the new upper track roller by positioning it on the tines, then snap the retaining latch in place to secure. Replace the upper dishrack and reposition the front stop clips and snap them into place. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Blake
November 11, 2019
Hello, The dishwasher top rack roller assembly has disconnected and the fasteners are disintegrating. will ordering x 1 of this part give me 2 fasteners with roller on 1 side of the rack?
For model number DU1055XTVBA
Hi Blake, you would need to order 2 of PS11769236. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Hans
January 13, 2020
Re: Dishrack roller, upper rack, your part # w10888592 (item no. 2 in your product sketch) which replaces my part # 8575281. Question: Each of my 4 rollers has a blue tab attached called a top rack adjuster and can be used to adjust the rack's height. I am not sure if your roller features this tab, as your illustration of the part is too small and grainy. Kindly advise. Sincerely, hans heller
For model number W10656407A (Whirlpool under counter dishwasher)
Hi Hans. These rollers do not have such a feature. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barbara
October 26, 2017
Whirlpool dishwasher, the picture of the roller assembly shows the part i need: #2 in the diagram. Broke in pieces that gorilla glue will not fix. I currently have it ducktaped to the basket. It looks like a Generic piece. Even though you do not carry the model no., will that part work? Can i just buy the piece?
For model number WDF520PADM7
Hi Barbara,
Thank you for your inquiry. Yes, the dishrack roller assembly you referenced in your question to us is the correct part for your appliance. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
January 6, 2018
How does one actually install the upper rack roller assembly? The existing part seems to be glued on? How do you get it off? Does this part then just snap on?
Hello Mark, Thank you for your inquiry.Pull the upper rack out and use a screwdriver to release the front rack stops from the upper dish rack rails. Slide out the upper rack out and use a small flat head screw driver to push the tab on the roller out so you can release the retaining latch securing the old assembly. Now release the brackets from the tines to fully detach. Install the new upper track roller by positioning it on the tines, then snap the retaining latch in place to secure. Replace the upper dishrack and reposition the front stop clips and snap them into place. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11769236
Manufacturer Part Number: W10888592
Manufacturer Part Number: W10888592
Brand
Model Number
Description