![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
HOUSNG-OUT
Fits your MGD5500FW0!
$258.51
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your MGD5500FW0!
PartSelect Number
PS11766743
Manufacturer Part Number
W10906551
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Maytag, Amana, Admiral.
Part# W10906551 replaces these:
W10108230, W10211902, W10219012, W10219017, W10672683, WPW10219012
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
April 26, 2023
Are the two perforated flaps, located immediately inside the housing opening, sold separately?
For model number WED92HEFW1
Hi Jack,
Thank you for your question. The outer grille, part number PS12114427, is sold separately. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Susan
September 15, 2023
Can the grill out be removed to clean the lint inside the dryer?
For model number WGD70HEBW1
Hi Susan, thank you for your inquiry. We have found that you can simply pull out the lint filter inside the dryer to clean, but in order to remove the grill-out, part number PS12114427, follow the instructions: unthread the rear screws securing the top panel. After that, disconnect the control panel wire connector from the control board. Now lift up the front of the dryer, lose the two middle screws. Now unthread the two screws securing the front panel. After that, unthread the three top screws to lift the front panel up, securing the lint filter. Install the new lint filter housing by aligning it on the front. Tighten the three screws to secure, insert the lint filter in to new housing and reassemble everything. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Alejandro
October 5, 2023
Good morning:
Currently, I have a WHIRLPOOL dryer model: 7MWGD75HEFW0 (capacity 17 KG)
Inside the HOUSNG-OUT W10906551 part, there are 2 x plastic hinges, which bend when the Lint Filter WPW10516085 is inserted. Do you sell those 2 x plastic hinges separately? (those plastic hinges are one on the left and one on the right of the entrance to the HOUSNG-OUT W10906551)
For model number 7MWGD75HEFW0
Hi Alejandro, thank you for the question. The lint screen door cover compatible with your model is part number PS12347731. It helps the lint screen to stay in place and collect lint properly. It is sold individually. You may need to order them separately for left and right side. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11766743
Manufacturer Part Number: W10906551
Manufacturer Part Number: W10906551
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)