Screw
Fits your JDB1100AWB!
$10.11
Special Order
Fits your JDB1100AWB!
PartSelect Number
PS11757599
Manufacturer Part Number
WPY912620
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana, Magic Chef.
Part# WPY912620 replaces these:
6-912620, 9-12620, 912620, Y912620
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Plastic bezel broken
1 - Unlugged power cord.
2 - Reviewed main plastic panel to see where required screws were located.
3 - Removed 8 screws on inside stainless panel.
4 - Separated the loose panel while removing screws holding the front plastic bezel in place. Removed two screws hold latch in place.
5 - Noticed that two screws were holding the PC board down plus a retaining nub on the plastic piece. Removed screws and held PC board out of way.
6 - Pulled off plastic splash shield held down with sticky gunk.
7 - Was a little difficult keeping the front door panel separated from the inside panel while doing all the work.
8 - Installed new handle into latch device and then attached to inside of door.
9 - Put it all back together twice after forgetting to install the two PC board screws. Oops.
10 - Felt confident the repair was correct when done.
Parts arrived as promised. Web exploding details insured exact replacement part.
2 - Reviewed main plastic panel to see where required screws were located.
3 - Removed 8 screws on inside stainless panel.
4 - Separated the loose panel while removing screws holding the front plastic bezel in place. Removed two screws hold latch in place.
5 - Noticed that two screws were holding the PC board down plus a retaining nub on the plastic piece. Removed screws and held PC board out of way.
6 - Pulled off plastic splash shield held down with sticky gunk.
7 - Was a little difficult keeping the front door panel separated from the inside panel while doing all the work.
8 - Installed new handle into latch device and then attached to inside of door.
9 - Put it all back together twice after forgetting to install the two PC board screws. Oops.
10 - Felt confident the repair was correct when done.
Parts arrived as promised. Web exploding details insured exact replacement part.
Other Parts Used:
-
Michael from Silverdale, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle latch broken / front panel broken
Maytag repair man 1 year ago caused most of the damage after I took the front cover off - the repairman broke off most of the screws holding the front panel in place leaving me to replace the front assembly.
The repair was easy - save yourself and do it yourself vs paying someone alot of money to only make it worse in the long run...
The repair was easy - save yourself and do it yourself vs paying someone alot of money to only make it worse in the long run...
Other Parts Used:
-
Kenneth from Cedar Park, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
8 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Del
January 18, 2018
There are 11 'Star' headed screws holding the back panel to the front door !! simple question, what size is the Star driver required to 'fit' these screws ?? many thanks !! later, del ~
For model number mdb86000aws
Hi Del,
Thank you for your question. You would need a flat head Phillips screw about 1/2 to 3/4. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757599
Manufacturer Part Number: WPY912620
Manufacturer Part Number: WPY912620
Brand
Model Number
Description