Troubleshooting
This part fixes the following symptoms:
Not draining | Noisy | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Jenn-Air, Kenmore, Whirlpool.
Part# WPW10531320 replaces these:
AP6022694, W10314713, W10531320, WPW10531320VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Dominique B - 18 days ago
Verified Purchase
Perfect fit
Saved $250 of installation!!! Very easy to install.
Rich R - April 18, 2024
Verified Purchase
Easy fix for annoying drone from Dishwasher
My ‘silent’ dishwasher had been anything but for too long - not even two years old and it sounded like it was fit for the scrap heap. Traced the source of the noise to the drain pump - cleaned it out but still moaned like a bookstore cat. Ordered a replacement, fitted it in about a minute - no more noise
Jim A - February 23, 2024
Verified Purchase
Easy repair
I was nervous about fixing my dishwasher myself but even more cautious about having someone come and do it. I ordered the part, read the installation online, and had my 24 year old son install it. Took literally 5 minutes to remove the old part and put in the new one! It works better than it ever has!! Thanks PartSelect.
Lenford M - October 18, 2023
Verified Purchase
Exact part, repair was surprisingly easy
Part arrived on time, it was the correct part, repair was easy. Partselect thank you for your service.
Gordon H - July 14, 2023
Verified Purchase
Easy repair, great part, worker as expected
Easy repair, great part, worker as expected
Jason W - September 27, 2022
Verified Purchase
Easy repair
part worked perfect
Robert H - September 7, 2022
Verified Purchase
Easy to install. Worked perfectly
The part arrived quickly and was easy to install
MARK V - May 7, 2022
Verified Purchase
Easy to install perfect fot
Everything back in order sgain
John L - December 7, 2021
Verified Purchase
An easy dishwasher fix
Fast shipping, great service and the pump is working perfectly. For $100 and a few hours work I not only saved the cost of a new dishwasher but also saved the landfill from dumping perfectly good stainless steel and an otherwise working machine.
Heather T - July 7, 2021
Verified Purchase
Super easy repair
Received this and was able to install it in 15 minutes. Very easy repair. And happy to have a functioning quiet dishwasher again!
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drain pump flange broke
Laid on my side amd reach under unit
Other Parts Used:
-
Paul from CANONSBURG, PA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was making a moaning sound when draining.
Unplug dishwasher. Remove lower front accessible panel. Disconnect wires to the drain pump. Rotate pump to unlock and remove. Apply plumbers grease to rubber seal and install new pump. Connect wires. Plug in dishwasher and run rinse cycle to check for no water leak. If all okay replace access panel. Done.
Other Parts Used:
-
Douglas from SAINT JOHN, IN
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wasn't draining
Took minutes to repair. Unhooked the electrical plug connector to the drain pump. 1/4 turn to the left and pump was off. Just the opposite to install new pump
Other Parts Used:
-
James from NEW BERLIN, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drain Pump failed
Took the kick plate off without removing the the machine.
Reached in and turned the existing pump to loosen it. Then disconnected the wire.
Reversed the process to install the new pump.
Reached in and turned the existing pump to loosen it. Then disconnected the wire.
Reversed the process to install the new pump.
Other Parts Used:
-
paula from ASHEVILLE, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We found pieces of glass in the drain pump
Our new drain pump arrived with 2 clips broken. So we switched the housing with the old pump and installed
Used youTube video for step by step instructions
Used youTube video for step by step instructions
Other Parts Used:
-
Kathleen from DUBLIN, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen Black
November 27, 2018
I'm considering replacing the drain pump on this dishwasher as it has stopped draining and so does not complete the cycle....it just stops and shuts down. There is a clicking noise that happens intermittently when the machine is trying to drain. Does this sound like the pump to you? I have checked the drain hose and it is not blocked. Do you have assembly drawings that show what all the numbered parts in the diagram are? Thanks in advance
For model number KUDEA48FXSS6
Hello Stephen, Thank you for the question. The clicking sounds like the control board trying to send the signal to the defective pump to start. If you enter the model number into the site and click on the 9th diagram, it will show all the parts. Hope this helps, good luck with this repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Carmen
September 13, 2019
The dishwasher is washing well and even drains. Right after it drains it starts to make a really loud noise off and on. It won't do anything else with the cycle and then eventually just turns off. Does this sound like the drain pump?
For model number KDTE254ESS1
Hi Carmen, thank you for your question. Yes, it sounds like you might want to check your drain pump for being the problem. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
June 26, 2019
My drain pump is not responding, i am ordering a new one should i replace any related parts at the same time ie drain hose etc
Thx
For model number KDTE254ess1
Hello David, thank you for writing. You may also want to consider the Drain Hose part PS2358130 and the Drain Hose part PS11756139 for your model.
Was this helpful?
Thank you for voting!
Brian
December 11, 2018
My dishwasher will not start the clean cycle. There is standing water in the base of the wash area. It is making an intermittent clicking/grinding sound a few times then it goes into cancel/drain mode before turning itself off. Does this mean the drain motor is jammed/failed?
For model number JDB8200AWS1
Hi Brian,
Thank you for your question. If you have standing water in the bottom of your dishwasher, there is likely food debris trapped in the filter or the pump preventing the water from draining. You will need to inspect these parts and clean them of any debris. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Arthur
August 10, 2021
I have a small amount of water standing in the filter bowl. The dishwasher smells, does not clean well, and does not complete the drying cycle. Any thoughts? I assume the pump is not working properly clearing the dirty water
For model number KDTE334GPS0
Hello Arthur, Thank you for the question. The first thing we suggest trying to cleaning the filter, pump and hoses to be sure there is no debris slowing the draining processes and leaving water behind. We hope this helps!
Was this helpful?
Thank you for voting!
Bruce
October 5, 2021
My dishwasher would not drain no noises, cleaned the drain filter and put it back. Ran the dishwasher with no dishes in it and it drained very good. Put dishes in and ran it the 2nd time and did not drain. I removed all water, cleaned everything, put liquid plumber in dishwasher and garbage disposal have not run yet to see results.
For model number KDTE254ESS3
Hello Bruce, Thank you for the question. If the Liquid Plumber does not fix the issue, we suggest checking the drain pump and hose for any blockage or clogs. If they are clear, you may have a defective Drain Pump. You can also check the Sump for any blockage as well before replacing the Pump. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Wally
June 21, 2022
I would like to know if we can get a replacement impeller for the drain pump rather then replacing the entire pump since the pump is still working? Thanks
For model number JDB8700AWP3
Hello Wally, Thank you for the question. Very sorry, the parts to the Pump are not sold separate from the Pump. Whirlpool only sells the impeller as part of the Drain Pump Assembly. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756031
Manufacturer Part Number: WPW10531320
Manufacturer Part Number: WPW10531320
Brand
Model Number
Description
Kenmore
66512776K311
Dishwasher
- Kenmore Dishwasher Model 665.12776K311 (66512776K311, 665 12776K311) Parts