Product Description
Water Level/Pressure Switch Specifications
This water level switch senses the level of water in the inner tub.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Washer Water Level/Pressure Switch
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WPW10514214 replaces these:
AP6022522, 8181695, W10514214
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Stan E - September 17, 2020
Verified Purchase
Water not draining intermittently
My problem with the water not draining was an intermittent problem and since the part arrived the drain has not happened.
Gilles F - September 7, 2019
Verified Purchase
great service
very fast service I love it
Peter K - September 1, 2018
Verified Purchase
What is wrong? (Scratch my head)
No water coming into my washing machine. After figuring out what was wrong, I contacted Part Select, the part was delivered promptly exactly what I needed original part,easy fix and the appliance works great again. Thank you for your great service.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was reporting F20 (Water Pressure)
After removing the Top Cover and back cover by removing the 3 screws for the top and 10 screws on the back cover to expose the interior of the machine. Remove the rubber hose that was attached to the bottom of pressure switch. Pushed gently upward on the pressure switch until it popped out. Gently press down on the 2 small tabs on the plug and then gently pull the plug out. Placed new pressure switch in place, plugged the connector back into the switch. Also doubled checked the hose to ensure that the tubing has not rubbed a hole it from rubbing on the concrete counter balance. If yes then remove the tube from the bottom of the washer and replace with approximately 2 feet of 3/16 inner diameter/1/4 outer diameter tubing. Attach the new tubing to the bottom of the washer port and the pressure switch. Attach the new tub to the water discharge hose using tie wraps or electrical tape to ensure not to occur again.
Other Parts Used:
-
Joseph from BINGHAMTON, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
14 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
February 2, 2023
why would the manufacturer replace a part, is the new part better or did they have to start to substitute due to the age of the appliance?
Hi Bruce,
Thank you for your question. Over time the manufacturer may update a part due to a variety of different reasons. For information on the part you are referring to, you will need to contact them. If you have any questions, please let us know. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755855
Manufacturer Part Number: WPW10514214
Manufacturer Part Number: WPW10514214
Brand
Model Number
Description