![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Troubleshooting
This part works with the following products:
Blender.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WPW10497275 replaces these:
W10497275
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard T - March 14, 2024
Verified Purchase
Perfect fit
The Part showed up quickly. The part fit great. It has been working fine ever since.
Henry V - February 19, 2023
Verified Purchase
Blender Lock Base
Perfect fit and quick delivery.
Nicolas D - November 10, 2021
Verified Purchase
Perfect part
The perfect part right on time for an easy repair!
Gregory M - January 16, 2020
Verified Purchase
Kitchen aid blender
Correct part arrived. The original part had split at the mounting point for the screw causing the blender to shake while in use. Both mounting points were split. The new part arrived quickly. The part number was superseded, possibly an upgrade in plastic quality.
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leonard
August 19, 2019
Ok so this thing where the motor bolts to the lock for the jar inside one of those plastic pieces is broke. But I have no clue how to remove the locking plastic
For model number KSB1570ER0
Hello Leonard, Thank you for the question. First remove Coupler by tapping it clockwise. Flip the appliance over and remove 4 screws holding base. Next remove 4 more screws holding Lock-jar. 2 of those screws have spring with a washer. Then you can remove the lock jar. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
June 19, 2023
Trying to remove the coupler to replace but it moves freely both directions on the lock jar base. How to remove?
For model number WPW10279256
Hi Carol, thank you for reaching out. We are providing you with instructions that will help you replace the coupler.
1- When you take the blender coupler off, it is left-handed threaded, so we have to turn the coupler clockwise.
2- Use a flathead screwdriver and hammer, and just give it a sharp tap so it spins in that direction.
3- Put the new coupler on and rotate it in an anticlockwise direction.
We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755652
Manufacturer Part Number: WPW10497275
Manufacturer Part Number: WPW10497275
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)