![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Water Level Switch
$296.26
Special Order
PartSelect Number
PS11752588
Manufacturer Part Number
WPW10312527
Manufactured by
Whirlpool
Product Description
Water Level Switch Specifications
This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag.
Part# WPW10312527 replaces these:
W10156252, W10312527
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The washer kept giving a 'suds' error or an F35 error and would not progress through any of the wash cycles. It would partially fill with water, just enough to dampen some of the clothes, and then show the error message.
I removed the 3 screws toward the top of the back of the washer to remove the top. After that, I located the water pressure level switch, slid it out of the slot into which it is secured, removed the narrow black tubing from the bottom of it, and draped the newly-unattached end of the tube so that it would be easy to find. Then I removed the set of wires and discarded the old switch.
Next I attached the wires to the new switch, attached the black tubing and put the switch back into the slot. I tested the washer and it worked. Next, I put the top back on using the 3 screws. That was it!
Next I attached the wires to the new switch, attached the black tubing and put the switch back into the slot. I tested the washer and it worked. Next, I put the top back on using the 3 screws. That was it!
Other Parts Used:
-
Susan from Hatfield, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
82 of 87 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Got SUD message and then F35
At start of cycle would get SUD followed by F35. Did a lot of checking on internet and learned that problem is most likely pressure switch. Wasn't sure this was the case. Purchased switch, installed in less than 15 minutes and washer was fixed.
Switch is located in top part of washer in back right corner as you face front of washer. Switch has electrical connection and hose that runs to bottom.
Switch is located in top part of washer in back right corner as you face front of washer. Switch has electrical connection and hose that runs to bottom.
Other Parts Used:
-
William from Mount Holly Springs, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
31 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error codes suds and F35
I removed the back and top panels of the unit according to the schematics provided and identified the switch. I snapped the old switch out and snapped the new switch in.
Other Parts Used:
-
James from Alexandria, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
20 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
SUD - followed by F39
I started getting this error; Browsing around the net, I came to know it is because of SWITCH-WL going bad. The part number is W10156252 and part name is also called as Switch, analog pressure sensor.
I removed the top cover of the washing machine, just need to remove two screws from back, top cover will come out. This switch is present on back right side of the machine. It was easy to remove the part from the machine; but make sure to see how the wire is connected to the part before you remove the wire from the switch. It is easy to connect the wire and put it back.
After changing this machine looks happy.
I removed the top cover of the washing machine, just need to remove two screws from back, top cover will come out. This switch is present on back right side of the machine. It was easy to remove the part from the machine; but make sure to see how the wire is connected to the part before you remove the wire from the switch. It is easy to connect the wire and put it back.
After changing this machine looks happy.
Other Parts Used:
-
Meenalosini from San Ramon, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
10 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer failed to fill and run wash cycle. Internet research quickly provided clear problem definition and solution.
Removed top cover. Unplugged switch and replaced it with the new one.
Other Parts Used:
-
Anthony from North Augusta, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752588
Manufacturer Part Number: WPW10312527
Manufacturer Part Number: WPW10312527
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)