Handle - White
Fits your 11068002011!
$88.08
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 11068002011!
PartSelect Number
PS11751972
Manufacturer Part Number
WPW10284095
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore.
Part# WPW10284095 replaces these:
W10284095
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door handle had shattered
Removed the door after some trial and error attempts. Door handle should come with instructions. Nothing but the handle was in the package. YouTube videos did not cover this model.
Remove the screws holding the hinges to the door, one on each hinge. Pull the door straight up from the hinges. Be careful, the hinges have springs that shut the door. Once the door is off, remove the screws around the four edges. Separate the front from the inside of the door. Set the inside of the door aside. Remove the flanged nuts from the inside of the door. There may be other screws to remove and save. Save the nuts for reinstallation.
Remove the handle. Replace with the new handle and reuse the flanged nuts and screws to install the handle. Reassemble the door (there may be a piece of cardboard inside for sound proofing) and slide it back onto the hinges. Replace hinge screws. Walla, you’re done.
Remove the screws holding the hinges to the door, one on each hinge. Pull the door straight up from the hinges. Be careful, the hinges have springs that shut the door. Once the door is off, remove the screws around the four edges. Separate the front from the inside of the door. Set the inside of the door aside. Remove the flanged nuts from the inside of the door. There may be other screws to remove and save. Save the nuts for reinstallation.
Remove the handle. Replace with the new handle and reuse the flanged nuts and screws to install the handle. Reassemble the door (there may be a piece of cardboard inside for sound proofing) and slide it back onto the hinges. Replace hinge screws. Walla, you’re done.
Other Parts Used:
-
Fred from BRADENTON, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Justin
February 10, 2018
Is this the part for the white horizontal dryer handle for this front loading Kenmore dryer? Thanks
For model number 110.68002010
Hello Justin, Thank you for your inquiry. Yes, we are showing that this is the white horizontal handle for this model. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Fernando
March 14, 2019
Sería posible subir una fotografía de la pieza para saber exactamente si es la que necesito, gracias
Hola Fernando, gracias o la pregunta. Lamentablemente, no podemos cargar una imagen para las Preguntas y Respuestas, pero no dude en enviarnos un correo electrónico a la dirección customerervice@partselect.com con su número de modelo de imagen y dispositivo. ¡Nos complacerá poder ayudarlo!
Was this helpful?
Thank you for voting!
Andrea
October 11, 2019
What other hardware do I need to replace the dryer door handle?
For model number 11068002011
Hi Andrea,
Thank you for your question. You may need to purchase the screws and the nuts to secure the handle to the door. The part number listed under your model number for the screw is PS11751637 and the part number listed for the nut is PS11740697. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Carole
December 14, 2019
If i buy the dryer door handle do i need to buy hardware to put it on the dryer?
For model number 110.68002010
Hello Carole and thanks for writing.
Yes, as hardware is sold separately, however, you should be able to use your existing hardware. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751972
Manufacturer Part Number: WPW10284095
Manufacturer Part Number: WPW10284095
Brand
Model Number
Description