Product Description
Cabinet Rack Track - Left Side Specifications
This part is mounted to the side of dishwasher cabinet and helps the rack slide back and forth.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Jenn-Air, Kenmore.
Part# WPW10247512 replaces these:
8564923, W10078217, W10247512
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Lindsay T - May 6, 2020
Verified Purchase
Put dishawsher upper rack back to new condition.
Our KitchenAid dishwasher (KUDS02SRBL2) is 13 years old and the plastic sliders and roller balls had worn out of the upper track racks., The basket had been quite wobbly for a while, and eventually the slide inserts broke and the balls fell out. Actually ordered the right side track as well and replaced both. Other reviewers recommended twisting the track out of the brackets on the wall but I preferred replacing the entire assemblies. You only need to pull out the dishwasher about a third of the way to access the mounding screws, which are located on the sides close to the front of the unit. I installed the dishwasher with a long braided water hose and extra length electric cable so I did not have to disconnect the water or power. In addition to using the new mounting brackets attached to the rack, it gave an opportunity to clean off the grunge accumulated between the old brackets and the tub wall. You have to remove the rubber washers from the old brackets and place them in the brackets on the new track and reinstall using the previously removed mounting screws. All in all a pretty simple job. And, while you are there, remove the wash arm, accumulator and filter to clean out the plastic balls and other debris. Good idea to do this cleaning maintenance every year or so anyway.
Luc M - October 23, 2018
Verified Purchase
Perfect fit, quick delivery.
Perfect fit, quick delivery
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top Cabinet Racks broken
Unsnap the end covers on the old sliding rack and slide the basket assembly out. This leaves the frames for the rack slide on the right and left side of the unit. Both sides snap out by twisting them downward. Remove the plastic brackets on the new racks by twisting them off. Snap new rack slide frames into the corresponding side of the diswasher. They are marked with an "up" arrow. Unsnap end covers on new rack slide frames and reinsert the basket assembly into the frames. Snap end covers over rack slides to trap the rollers into the slide. When you are finished you should dissassemble the strainer unit on the bottom of the dishwasher by the pump and remove all the small plastic balls that were part of the rack assemblies. They fall out and clog up the chopper assembly and pump.
Other Parts Used:
-
Mark from Wellington, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
30 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top rack of dishwasher jamming
I purchased two new top rails and replaced them. It was a breeze. The racks actually "popped out" and I popped in the new ones! problem solved, I will buy from you again!
Other Parts Used:
-
barry from granby, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack Tracks were broken
Loosen screws and pulled out dishwasher,
remove screws on the old rack tracks and screwed new rack tracks on. Pushed back in dishwasher and tightened screws. Very easy
to replace.
remove screws on the old rack tracks and screwed new rack tracks on. Pushed back in dishwasher and tightened screws. Very easy
to replace.
Other Parts Used:
-
Carolyn from Garland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center rack lost bears on track and was sagging
Replaced both right and left side rack slides. Had to remove dishwasher from cabinet as rack screws installed from the outside of the dishwasher tub. 4 screws total on rack slides. R and R of dishwasher out of cabinet and reinstall was about 1 hour to do. Disconnect water and drain lines to remove dishwasher. Not hard to do,
Other Parts Used:
-
Robert from CHINA GROVE, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
June 3, 2019
Are left and right descriptions as you are standing when facing the front of the dishwasher?
For model number KUDS02FRBL0
Hello Fred, thank you for asking. Left and right is determined when standing in front of the appliance looking at it.
8 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751024
Manufacturer Part Number: WPW10247512
Manufacturer Part Number: WPW10247512
Brand
Model Number
Description