Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elizabeth
November 8, 2017
Oven doesn't start.
For model number WFG381LVS1 and Serial: R00718155
Hi Elizabeth,
Thank you for your question. You should test your oven sensor, your ignitors, and your spark module to make sure that they are all working. You can test all of these parts with a multi meter. If they are all working correctly, it may be your electronic control board that is the issue. Good luck with your repair.
Was this helpful?
Thank you for voting!
Ed
November 11, 2017
Looking to replace spark igniters on all 4 burners on stove top (none are lighting consistently and look kinda burned). Do I need to buy 4 or do they come in sets of pairs or all four?
For model number WFG371LVB0
Hi Ed, Thank you for the question.The Surface Ignitors are sold individually, so when replacing all 4 you will need to order 4 ignitors. Good luck with the repair!
Was this helpful?
Thank you for voting!
Zach
April 24, 2018
If my oven isn’t igniting would this be the correct part to get?
For model number Agr5844vds4
Hi Zach,
Thank you for your question. If your oven is not igniting, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the bake iginiter, the broil igniter and the spark module. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Zach
May 3, 2018
I replaced the ignitor, i get sparks. I smell gas but it doesn’t light. What is the issue?
For model number AGR5844VDS4
Hello Zach, thank you for your question. If the suface igniter has been replaced, you're getting a spark at the burner and smelling gas but the top burner is still not igniting, I would recommend checking the burner head for any debris that is clogging the holes where the gas comes out, there may not be a good flow of gas from around the burner head. You might also want to consider replacing the burner valve that controls that burner as the valve may not be opening enough to release a sufficient amount of gas to the burner. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750539
Manufacturer Part Number: WPW10216419