Product Description
Bake Element Specifications
This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Crosley.
Part# WPW10207398 replaces these:
AP6017075, 9760768, W10207398
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Ritchie M - April 18, 2024
Verified Purchase
Received partly quickly, installation went well…. Happy family here. Thank you for good service
All is well
SHAWN M - February 15, 2024
Verified Purchase
Came quick
Worked as expected
Clint M - October 9, 2022
Verified Purchase
This is not a particulary easy repair as a lot of dissasembly is required.
This repair took about an hour to do. 20 minutes to take the range apart, 5 minutes to install the element, and 30 minutes to figure out how it all goes back together! I also had to replace the thermistor as it had opened. This caused to oven element to self destruct as there is nothing in the oven control circuitry to stop the element from burning up. Make sure you check the thermistor if you have to replace the element.
Shawn R - October 2, 2022
Verified Purchase
Works perfect
Very grateful to get this at the price we did. Your return policy could use an additional 30 day return grace period though. I spent $90 on brackets that were not right and we were in vacation during the time they were delivered and it never got looked at u til day 63! Not the right parts. Now I’m stuck with them
Richard S - September 29, 2022
Verified Purchase
Exactly what I needed
Delivery was super fast. Very happy with this purchase.
Janet A - September 18, 2022
Verified Purchase
Oven element
The part fit perfectly and works great
Michael W - April 12, 2021
Verified Purchase
Easy order, correct part, shipping confirmation same day ordered
Part was correct one ordered, arrived in perfect shape 3 days after ordering. Well done.
Ron F - March 13, 2021
Verified Purchase
Satisfied with Product
Arrived promptly and easy to install when reviewed comments from other purchasers how to install.
Michel M - August 24, 2020
Verified Purchase
Very difficult repair, but part was perfect.
The part came extremely fast and in good condition. It was a baking element to replace through the back of the kitchenaid wall oven. A replacement not user’s friendly, but the oven is working perfectly well now.
Chantale M - July 10, 2020
Verified Purchase
Great part, fast delivery
The part was new, my stove works great now!! Happy with prompt delivery.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 1.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Corroded bake element
Pull it away from the wall and take everything off the back. Unscrew the element cover, cut through the insulation and remove the part. Not easy, watch for sharp sheet metal edges
Other Parts Used:
-
Tim from Langley, WA
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Bake Element
The existing bake element was charred and in pieces so could not be pulled out. We destructively disassembled the range and pulled out the pieces along with the melted insulation. The wall behind was also scorched.
Other Parts Used:
-
Gary from NELLYSFORD, VA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
May 6, 2018
The bake element for this model is not inside the oven. Where is the access for this hidden bake element? I'm assuming it's in the back. Can you explain how to access and change the element. Please do not provide a link to the same video - it's not applicable to this model. Thank you.
For model number KESS907SSS04
Hi Greg, Thank you for the question. For the hidden element, you will need to pull the appliance out from the wall to access it from the back. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
August 12, 2019
Do you have instructions on installation of part w10207398 for the model kdss907sss05 ?
For model number KDSS907SSS05
Hello Jimmy, Thank you for the question. You will need to pull the appliance out from the wall to access the panel on the back of the appliance. Once the panel is removed you will need to move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and element and reverse the steps to reinstall. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
February 27, 2019
I am trying to replace the bottom hidden bake element on my KitchenAid oven and cannot for the life of me figure out how i am suppose to get it out. I have pull a few covers off the back and found the 2 element prongs sticking out the back and disconnected the wires. I move some of the insulation out of the way exposing 2 screws apparently holding it in. But now it will not come out any further and i am wondering if it is suppose to come out the front or the rear of the oven somehow. The video you keep listing to help people does not apply to this particular model.
For model number KESS907SSS04
Hi Mark,
Thank you for your question. There is a video on our website that you can reference on how to install the bake element. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
April 25, 2019
How to install bake element part# wpw10207398
For model number kebs107sss04
Hi Earl, Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
LOU
February 25, 2019
How do i remove oven rack : Ps 12348730 for cleaning
For model number KEBS207SSS00
Hello Lou, Thank you for your question. This is a slide out oven rack. You simply need to lift the rack slightly then pull it out of the oven. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
October 14, 2017
How do you get to the heating element to change it
For model number KDRS807SSS04
Hello Linda, thank you for contacting us. The bake element would be the bottom heating element in the oven. It would be exposed and fairly easy to access. We have a how to video that shows how to replace this part, you can follow the link below, hope this helps!
https://www.youtube.com/watch?v=aahcHBzTrk8
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 27, 2017
How do you remove oven bake element to replace
For model number KESS907SSS04
Hi Jean,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
March 2, 2020
Is there a video available to replace the bake element for this model ?
For model number Kesk901sss01
Hello, Thank you for your question. You will want to first remove the screws from the back of the element where the bracket is, and then you should be able to just pull it out. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 27, 2017
Are the oven bake element and warming drawer element the same element
For model number KESS907SSS04
Hi Jean,
Thank you for your question. They are not the same elements. I have listed the element for your drawer in a link down below. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Jean
October 27, 2017
I can see broil element and warming drawer element bake element is not visible so how do i get to it
For model number KESS907SSS04
Hi Jean,
Thank you for your inquiry. The bake element would be the bottom heating element in the oven. It would be exposed and fairly easy to access. We have a how to video that shows how to replace this part, you can follow the link below, hope this helps! https://www.youtube.com/watch?v=aahcHBzTrk8. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750370
Manufacturer Part Number: WPW10207398
Manufacturer Part Number: WPW10207398
Brand
Model Number
Description