Electronic Control Board
Fits your MHWE900VJ00!
$378.34
Special Order
Fits your MHWE900VJ00!
PartSelect Number
PS11749165
Manufacturer Part Number
WPW10156258
Manufactured by
Whirlpool
Product Description
Electronic Control Board Specifications
Also known as a steamer board.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Kenmore.
Part# WPW10156258 replaces these:
W10156258
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andrew
January 14, 2019
Pressure sensor was already replaced - will this board fix the sud and f35 errors? The washer sometimes needs to be restarted five or more times due to error codes before running thru the cycle.
For model number WFW9600TW01
Hello Andrew, Thank you for the question. I would first suggest checking the pressure hose to the switch. Suds can get built up and block the hose. You can also try a gallon of white vinegar poured in the detergent slot and run the 'clean washer' cycle.These error codes normally there is a defective switch or a build up of suds or soap. If these do not fix the issue you may need a control board. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749165
Manufacturer Part Number: WPW10156258
Manufacturer Part Number: WPW10156258
Brand
Model Number
Description