Product Description
Water Inlet Valve Specifications
This part attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Kenmore.
Part# WPW10156253 replaces these:
AP6015883, W10156253
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Nadine H - May 7, 2019
Verified Purchase
Customer Service needs work
When i placed order, the lady seemed offended when i asked her to read my email address back to me to make sure it was correct. Well because she got unpleasant about that i didn't have her check shipping address, and she entered it incorrectly so then i had to go pick it up from depot as they couldn't deliver to an incorrect address, and it took longer for me to get the part.
May 8, 2019
Hello Nadine, Thank you for the review. I’m sorry to hear you had that experience. We would like the opportunity to fix this situation. I will be sending you an email shortly. Look forward to hearing from you!
Mike G - April 17, 2019
Verified Purchase
Easy repair!
The part arrived; I installed it and the machine is back in working order!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was giving F20 F35 and SUDS error messages
After replacing the Water Inlet Valve and Flowmeter the F20 error message stopped. However, after ordering and replacing the Water Pressure Sensor the F35 error message and the SUDS error message stopped and the washer is finally working.
Other Parts Used:
-
Amie from Port Clinton, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench set
17 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
August 13, 2019
The f20 display. The problem has been going on for years. What i have been doing is removing the hot and cold water hoses an d hooking them up again and it would work again for a while. Will replacing the water inlet valve solve the problem?
For model number WFW9600TW00
Hi Charles, thank you for your question. Yes that error code means that the machine is not detecting any water going into your machine. You may want to check the hoses for kinks or any blockages. If there are not any then test your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Vincent
January 25, 2023
Water for the softener does not flow in when needed. not enough to flushed it down
For model number WFW9600TW01
Hi Vincent,
Thank you for your question. If your washer is not filling with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the inlet hoses and screens, the water inlet valve, the door lock, the water level pressure switch and the electronic control board. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749164
Manufacturer Part Number: WPW10156253
Manufacturer Part Number: WPW10156253
Brand
Model Number
Description