Product Description
Water Filter Housing Specifications
This part houses the water filter.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
KitchenAid, Whirlpool, Jenn-Air, Kenmore.
Part# WPW10121140 replaces these:
AP6015341, 2260526, W10121140
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Ken M - April 13, 2024
Verified Purchase
Challenging but successful repair
This was our first experience with PartSelect. Part was as described and exactly what we needed. Delivery was rapid as well.
Andrea R - July 14, 2021
Verified Purchase
Great part,
It was in perfect condition, original packaging, but it took longer than expected to receive it even though I live in Toronto. Despite I am very handy and do lots of repairs by myself, replacing the water filter housing on my fridge (KitchenAid KSSC42QVS01) was harder than expected (very limited access complicated by short tubing that made it difficult to disconnect them and reconnect to the new housing)
KUMAR S - August 29, 2020
Verified Purchase
Install rasily
Working pretty good
Ralph S - January 31, 2019
Verified Purchase
Perfect part
Replacement was very easy.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Recently replaced solenoid for ice maker / water dispenser. Then had problem with filter staying in place and not continually popping out.
Watched video of similar model repair for filter housing. But the model KitchenAide refrigerator requires enter and replacing housing from the back. My model has a metal facing which has doors attached to it also. It was simple repair though from the backside of the appliance.
Other Parts Used:
-
JOHN from BAKERSFIELD, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melody
February 11, 2018
Can get the old housing out of the KitchenAid refrigator how can i get it out
For model number KSCS25FVSS03
Hello Melody, thank you for your question. To replace the housing you will need to turn off the water to the fridge. Next, remove the existing filter and then remove the kick plate. The housing should be held into place with two screws that can be removed. Pull the the housing towards you slowly, as there are water lines that will be attached at the back. Remove the water lines by depressing the quick connect coupler that the water line goes through. As you're depressing, pull the water line out of the housing. Have a towel or something handy to catch any water that leaks out of the unit. Once the water lines are removed you can pull the housing out from under the appliance. Here is a link to a video that might help you. This isn't the housing for your specific appliance, but the removal and installation should be relatively the same. I hope this helps!
https://www.youtube.com/watch?v=FBKsbenMhVU
3 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
November 26, 2017
I am looking at ordering ps11748616, the water filter housing as mine is broken since water just freely flows from my unit every time i try to replace the filter. Is there an installation video so i know what i'm getting into?
For model number KSCS25INSS00
Hi Patrick,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the water filter housing. This video may not show your exact model number, but it will give you a general idea on how to install it. You will find the video under part number PS11748615. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marshall
May 27, 2022
My water filter doesn't leak, but I can't get it out of the filter housing. The release button doesn't seem to push. I've tried pushing the filter back in but nothing happens. Is there a trick? Or do I have to replace the housing (not something I want to do).
Thanks
For model number KSCS25FVSS03
Hi Marshall,
Thank you for your question. According to your owner's manual, 1. Press the eject button to release the filter from the base grille.
2. Pull the filter straight out.
3. Turn the cap counterclockwise to remove it from the filter.
IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
4. Align the ridge on the cap with the arrow on the new filter and
turn the cap until it snaps into place.
NOTE: You can run the dispenser without a filter. Your water
will not be filtered. Simply insert the cap all of the way into the
base grille and rotate the cap until it is firmly in place.
5. Remove the protective covers from the O-rings. Be sure the
O-rings are still in place after the covers are removed.
6. Push the filter into the base grille. The eject button will pop
back out when the filter is fully engaged.
7. Flush the water system. See "Water and Ice Dispensers."
If you have tried this and you are still unable to install the water filter, you will need to replace the water filter housing. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748616
Manufacturer Part Number: WPW10121140
Manufacturer Part Number: WPW10121140
Brand
Model Number
Description