Part Videos
Replacing your Maytag Dishwasher Drain Hose
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana, Magic Chef.
Part# WP99002652 replaces these:
AP6014458, 99002652
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
JOE S - February 18, 2021
Verified Purchase
Dishwasher Drain Hose
The existing drain hose on our Maytag Dishwasher developed a crack and began leaking. I went onto the PartSelect website, entered my model number of our dishwasher, found the part I needed, ordered and completed the transaction. The part arrived at my house the very next day. The part was an easy installation and the dishwasher is back functioning. I have ordered several parts from PartSelect before and will certainly order from them in the future if the need arises.
Larry L - March 21, 2019
Verified Purchase
Great part are a reasonable price
The hose was exactly the same as the original part
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cat brought in a mouse that turned into a RAT!
Ist Repaired a hole in a rubber hose under the sink. 2nd Removed the 10 foot drainage hose with a regular screw driver (1 clamp at each end of the hose).
3rd Removed the insulation and replaced with the new after disinfecting the entire top and sides of the dishwasher with bleach. This eliminated all bad odor etc. only had to remove 2 plastic brads, 1 on each side of the unit.
Done and no leaks.
3rd Removed the insulation and replaced with the new after disinfecting the entire top and sides of the dishwasher with bleach. This eliminated all bad odor etc. only had to remove 2 plastic brads, 1 on each side of the unit.
Done and no leaks.
Other Parts Used:
-
Tim from Penn Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
16 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain line had split
disconnected unit (electrical, water, and waste) un mounted from countertop, removed from under countertop, unscrewed hose clamb, cut off wire tie. Attached new hose and wire tie (not included) reversed above steps. Done in about 15 minutes
Other Parts Used:
-
William from Interlochen, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
13 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original drain hose developed leak
Pulled dishwasher out far enough to get at the original hose. Disconnected and drained the hose. Connected new hose, zip tied the hose in place, pushed dishwasher back in place and re-anchored. Zippidy do...piece of cake. Perfect fit.
Other Parts Used:
-
Sy from CABLE, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
April 12, 2023
How long is this hose? My dishwasher is installed a long distance from the drain, so I had better make sure this will fit before ordering.
For model number JDB1250AWS
Hello David, Thank you for your inquiry. We show this hose is approximately 10 feet long. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747697
Manufacturer Part Number: WP99002652
Manufacturer Part Number: WP99002652
Brand
Model Number
Description