Oven Door Handle Retainer
$14.11
Special Order
PartSelect Number
PS11747457
Manufacturer Part Number
WP98004650
Manufactured by
Whirlpool
Product Description
Oven Door Handle Retainer Specifications
Used for door handle mounting stems.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Amana, Roper, Estate.
Part# WP98004650 replaces these:
AP6014219, 98004650
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven door handle attachment points became brittle, cracked and handle fell off
Removing the old push nuts was the most difficult task and it became necessary to pry each nut flap open a bit using a tiny slot screwdriver tip and then remove the nut from the damaged handle. This took the most time, being careful not to damage the glass front. Once the push nuts were removed, It took less than 5 minutes to reinstall the new handle, push nuts and attach the glass door with new handle with two screws through the oven door. Good as new.
Oh, yes, I returned the push nuts and screws that I ordered because replacements were included with the handle. Select Parts graciously refunded that part of my order.
Oh, yes, I returned the push nuts and screws that I ordered because replacements were included with the handle. Select Parts graciously refunded that part of my order.
Other Parts Used:
-
Larry from Lakewood, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
20 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the handle supports too long for this model
cut 3/8" off each handle supports and used no. 10 1/2' sheet metal screws to secure handle and door front to the oven door. The supports had to be shorten to allow the door front to fit correctly on the oven door.
Other Parts Used:
-
Theodore from Glenside, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Claudio
February 18, 2019
How are these push nuts installed? What tool is needed?
Hello Claudio, Thank you for contacting us! Unfortunately, we do not currently have installation instructions for this particular part. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747457
Manufacturer Part Number: WP98004650
Manufacturer Part Number: WP98004650
Brand
Model Number
Description