Product Description
Infinite Burner Switch - Large Element Specifications
This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
KitchenAid, Whirlpool, Roper, Inglis.
Part# WP9750641 replaces these:
AP6013889, 9750641, 9750641A
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
SHAWN D - November 6, 2023
Verified Purchase
My stove is working
This part has brought the largest burner on my 29 year old KitchenAid Ceran top Convection oven back to life, saving it from replacement and a trip to the dump. It was very challenging to spend money on a stove that would not last 1/3 of this time. Thank you for supporting parts for repairs. Mrs. S. Dodge October 2023
Robyn M - March 19, 2019
Verified Purchase
Great part
Exactly as expected. Fast shipping
Glenn H - October 5, 2018
Verified Purchase
Very simple repair. Replacement part was exactly the same as the original.
Part was received very quickly after it was ordered. Replacement only took about 5 minutes.
William H - July 27, 2018
Verified Purchase
Easy repair
Worked well. However we are are still waiting for the rest of the order.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broke off knob and burner switch accidentally
Lift top of control panel where florescent light bulb is enclosed. Remove florescent bulb. Remove two Phillips head screws that are below bulb. Top of control panel swings down toward front of range to allow access to burner switches. Simply replace wires on new switch in same location as old switch.
Other Parts Used:
-
Ron from GREELEY, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating elements heating too long and not cycling
Removed the top light, removed the 2 screws in the light pan and pulled the control panel over the stove top. Held controls exactly as mounted, removed wires from the old control and pushed on to the new ones. Removed the 2 screws that held the controls to the panel, tossed the old control and put in screws to the new controls securing them to the panel. Remember to unplug the range first. And, a secure bar that maintains the push button panel will have to be maintained, so tape before removing any parts.
Other Parts Used:
-
Steven from PENSACOLA, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 6, 2017
The large front left burner sticks on high and wont regulate temperature. Do I need to replace the infinite burner switch? If so how?
For model number GY396LXPT02
Hi Bill, Thank you for the question. Yes the Switch will need to be replaced to fix the issue. Here is a repair story left by a previous customer. "Lift top of control panel where florescent light bulb is enclosed. Remove florescent bulb. Remove two Phillips head screws that are below bulb. Top of control panel swings down toward front of range to allow access to burner switches. Simply replace wires on new switch in same location as old switch." Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747119
Manufacturer Part Number: WP9750641
Manufacturer Part Number: WP9750641
Brand
Model Number
Description