![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Planetary - Dark Pewter Specifications
Used with stand mixers.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9708715 replaces these:
9708715
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Eddy M - January 17, 2022
Verified Purchase
Works as expected! But know that colour is grey
The part came pretty quickly and switching my old planetary (which snapped in half) was easy.I expected the part to be black - to match my KA - but it is dark grey. Perhaps that is my misunderstanding though. In any case, it does the job and you can't see it the colour much anyways!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Planetary Drive shaft broke in two.
The old planetary unit dropped out when it broke leaving the upper part of the broken shaft and beveled gear in the motor housing. Removed label band and upper motor housing with phillips screwdriver. Removed beveled gear housing with phillips screwdriver and pulled out broken shaft. Used snap ring pliers to remove gear retaining ring and slid gear off broken shaft and pressed out retaining pin below gear. Put seal and o-ring on new shaft and inserted new planetary unit up into bearings and reinstalled pin and snap ring. Greased top end of shaft and reassembled gear housing and motor housing. The unit works better than before as the upper part of old shaft had never been greased. The new drive shaft is much stronger than the original which had a deep groove cut around it which weakened the shaft where it broke in two.
Other Parts Used:
-
John from Rockport, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rita
December 7, 2017
What does the planetary consist of? Is it just the outside cover or is the planetary shaft connected to it? Can you buy just the shaft? Mine broke and not sure what to order.
For model number KP26M1XPM
Hi Rita,
Thank you for your question. The planetary you have referenced in your questions to us consists of just the shaft. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747000
Manufacturer Part Number: WP9708715
Manufacturer Part Number: WP9708715
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)