Part Location Diagram of WP944224 Whirlpool Kickplate Support Clip
See part 24 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Kickplate Support Clip

$14.00
  Special Order
PartSelect Number PS11746875
Manufacturer Part Number WP944224
Manufactured by Whirlpool
Product Description

Kickplate Support Clip Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Kenmore, Whirlpool, Roper.
Part# WP944224 replaces these:
944224
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 4 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Kickplate support Clips failed
Replacing the support clips was simple. But since the replacements were the same as the ones that had failed, I modified them by epoxying metal strips on each side of the fingers which had failed. Without this mod I think they would have failed very shortly like the original ones did. This added a half hour to the repair.
Other Parts Used:
  • Edward from Mequon, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken kickplate retainers
replaced retainers. remove and replace four(4) phillips screws.
Other Parts Used:
  • Joe from STRATFORD, OK
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice, leaking valve.
Dual Outlet Valve Kit- Part matched up identical to my unit. Had previously worked on leaking valve but started leaking again. Easy, simple replacement, took about 30 minutes because I installed water filtration kit also. Runs quieter than before, making ice with hardly any notice now. Felt so impressed with myself I replace the defrost timer too in 30 minutes. Runs like a new machine now. Happy customer!
Other Parts Used:
Dual Outlet Valve Kit
  • Macy from WINTER HAVEN, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Kickplate Support Clip (Left side)
Unscrewed old broken part from the kickplate and attempted to install the new clip. Mounting screws would not go into the new clip. Had to drill out the mounting holes in the plastic clip using a #30 drill bit. Once the new clip was mounted, attempted to snap the kickplate back in place. Unfortunately at the left side the kickplate would not fully mate with the metal clip on the refrigerator body and would not snap all the way back to the refrigerator front surface, as the right side does. At least the kickplate doesn't fall down onto the floor on the left side as it did before. I suspect there is an alignment problem with the left side refrigerator metal clip, but have not pursued that yet.
Other Parts Used:
  • William from Fountain Valley, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
July 17, 2019
I have part # 2155013 which is to replace broken metal clip on fridge that the kickplate fits into. Problem is i can’t figure how to remove broken clip without drilling it. That would require removing the water filter brackets. What kind of fastener or rivet is being used? What tool do I use to remove it?
PartSelect logo
Hello Jim, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746875
Manufacturer Part Number: WP944224
Brand
Model Number
Description
Kenmore
1065730523
Refrigerator
Kenmore
1065730563
Refrigerator
Kenmore
1068138700
Refrigerator
Kenmore
1068138710
Refrigerator
Kenmore
1068138720
Refrigerator
Kenmore
1068138730
Refrigerator
Kenmore
1068138740
Refrigerator
Kenmore
1068138750
Refrigerator
Kenmore
1068138760
Refrigerator
Kenmore
1068138770
Refrigerator
Kenmore
1068138780
Refrigerator
Kenmore
1068138790
Refrigerator
Kenmore
1068139310
Refrigerator
Kenmore
1068139311
Refrigerator
Kenmore
1068139320
Refrigerator
Kenmore
1068139321
Refrigerator
Kenmore
1068139340
Refrigerator
Kenmore
1068139341
Refrigerator
Kenmore
1068139360
Refrigerator
Kenmore
1068139361
Refrigerator
Kenmore
1068139380
Refrigerator
Kenmore
1068139381
Refrigerator
Kenmore
1068139500
Refrigerator
Kenmore
1068139510
Refrigerator
Kenmore
1068139520
Refrigerator
Kenmore
1068139530
Refrigerator
Kenmore
1068139540
Refrigerator
Kenmore
1068139550
Refrigerator
Kenmore
1068139560
Refrigerator
Kenmore
1068139570
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service