Product Description
Water Inlet Valve Specifications
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature or amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Washer Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag.
Part# WP8540751 replaces these:
AP6013067, 8540043, 8540751, WP8540751VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Dana W - October 9, 2022
Verified Purchase
Perfect fit - quick repair
The original part had started to weep and I was concerned that the plastic body would soon split under pressure. (Months ago I'd experienced a failure of a toilet tank connection when the plastic nut had failed - a disaster!) This replacement went very easily. Good price too.
Brian T - December 8, 2021
Verified Purchase
great part
Great part, fast delivery
Jodie B - December 7, 2021
Verified Purchase
Excellent Service
The correct part was sent out in a very prompt service. Arrived within 36 hrs. Will definitely be doing business in the future with partselect.ca for all my appliance needs.
Ron C - September 15, 2021
Verified Purchase
Easy repair
Part was just as pictured and needed.worked as expected.thanks for the repair video, really helped
Rob L - January 19, 2021
Verified Purchase
Great part super fast shipping
Video showing install. Fast shipping. Highly recommend
Nathaniel G - August 12, 2020
Verified Purchase
excellent
part works great, good prices. quick delivery
Colleen C - May 20, 2020
Verified Purchase
Exactly what I needed
Arrived quickly,easily installed and working.
Christian M - May 12, 2020
Verified Purchase
Easy repair, part worked but wasn't the cause of my issues
I changed this first, as it seemed my pressure switch was working fine. When I blew into the pressure switch it seemed to activate the correct contacts. I changed this but my washer still wasn't working F-20. I ended up getting a pressure switch and that solved my problem. I also replaced the pressure switch rubber hose just to be sure, some people seem to get holes in theirs but mine was fine.
Melissa M - March 20, 2019
Verified Purchase
Easy repair, part was exactly as expected
Worked well to fix our problem
Lorraine M - March 10, 2019
Verified Purchase
Easy repair, great part
Part was great. Arrived quickly. Repair was easy and washer is working again.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
stripped the threads on the water inlet
Be careful threading the hose to the water inlet or you
can end up cross threading or stripping the threads, they are plastic and can easily be stripped.
It will save you time and $.
Unscrew the top of the washer and remove it. Removed a weirdo screw with a pair of pliers since I didn't have the tool to remove it.
Took out the old one and replaced it with the new one. Replaced the weirdo screw with a drywall screw and screwed it in place. Carefully threaded the hoses on and turned on the water. Success!
can end up cross threading or stripping the threads, they are plastic and can easily be stripped.
It will save you time and $.
Unscrew the top of the washer and remove it. Removed a weirdo screw with a pair of pliers since I didn't have the tool to remove it.
Took out the old one and replaced it with the new one. Replaced the weirdo screw with a drywall screw and screwed it in place. Carefully threaded the hoses on and turned on the water. Success!
Other Parts Used:
-
William from Belen, NM
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
35 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water running in all the time
Turned water supply off ,took the top of washing machine off, took water valve out installed new 1unit worked ok
Other Parts Used:
-
Brian from Liberty, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water inlet valve is leaking
1. Turn of hot and cold water valves. Disconnect the hot and cold water hoses from the unit back panel
2. Use a nut driver to unscrew the top screws from the unit back panel
3. Remove the top cover
4. The valve is located at the top left corner
5. Use a torx driver to unscrew the screw off the valve unit
6. Unclamp and remove the hose from the valve unit
7. Disconnect the electrical plugs from the valve unit
8. Remove the faulty valve unit
9. Connect the electrical plugs to the new valve unit
10. Insert the hose and clamp into the new valve unit
11. Place the new valve unit to the top left corner of the washer and secure it with the torx screw
12. Re-cover the top cover and secure it with screws
13. Reconnect the hot and cold water hoses
14. Re-open the hot and cold water valves.
15. Turn on washer and verify there is no leak
2. Use a nut driver to unscrew the top screws from the unit back panel
3. Remove the top cover
4. The valve is located at the top left corner
5. Use a torx driver to unscrew the screw off the valve unit
6. Unclamp and remove the hose from the valve unit
7. Disconnect the electrical plugs from the valve unit
8. Remove the faulty valve unit
9. Connect the electrical plugs to the new valve unit
10. Insert the hose and clamp into the new valve unit
11. Place the new valve unit to the top left corner of the washer and secure it with the torx screw
12. Re-cover the top cover and secure it with screws
13. Reconnect the hot and cold water hoses
14. Re-open the hot and cold water valves.
15. Turn on washer and verify there is no leak
Other Parts Used:
-
James from PALO ALTO, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746288
Manufacturer Part Number: WP8540751
Manufacturer Part Number: WP8540751
Brand
Model Number
Description