Part Videos
Replacing your KitchenAid Dishwasher Door Hinge - Right Side
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# WP8534853 replaces these:
8269011, 8534853
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Robert B - November 15, 2019
Verified Purchase
Does anyone remember the "lowered expectations" skits from SNL?
I still can't believe I was dumb enough to spend this much for a relatively small powder-coated metal bracket, but my 3D printer choked when I tried to fabricate the part myself. Although the part was delivered relatively quickly, it seems logical that a significant part of the hefty cost was for expedited shipping (which I didn't require). But after opening the cardboard box, I was surprised & dismayed to find that the bracket was bent in the wrong place. Some thoughtful preparation, the right tools, and patience resulted in the bracket being usable for its intended purpose. My experience was not PartsSelect.ca's finest moment...
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A small water leak at door
After replacing broken door cables I had a small leak at the door corner. I replaced door seal with that not fixing the leak and found that the door hinges were bent a little from the cables being broke for awile. Installed new hinges and leak is fixed now. A little difficult but once unit was pulled out about 6 inches the hinges were not bad to replace
Other Parts Used:
-
Tom from UNION GROVE, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge bent went spring cable broke
My wife hired a local repairman when the right side spring cable broke (I was out of town). He took two hours to fix it (and two appointments). The door would then pop open when running. He came back and replaced the latch. Problems persisted. I then ordered new hinges and replaced both in half hour or so. Would recommend doing all of these repairs yourself. None of these repairs are that hard and definitely not worth paying hundreds to do it. Trickiest part is pulling the dishwasher out from the counter without impacting the electrical or water connections. Disconnecting the power is important on all repairs. When you take the screws out of the door to get to the hinges, make sure you have a helper just to hold the door up while removing the last few screws. The left side hinge was really bent (when the right side spring cable broke) - caused the door to be out of square and thus would not effectively close. This was obvious after a 5 minute search on this this and other repair sites. Process that I used: 1. remove screws from both sides holding dishwasher into counter (may have screws into countertop as well). 2. turn off power, 3. pull out dishwasher far enough to see hinges and springs (careful of connections), 4. remove front door screws, 5. take off front panel, 6. remove spring cables (pull cable taut and remove "hook" from hinge)., 7. unscrew two screws holding hinge to door, 8. bend metal fingers around hinge pin to be able to remove hinge., 9. attach hinge in opposite path. 10. repeat on other side (if necessary), 11. reconnect things in opposite order...test door prior to reattaching door panel. Make sure you level the unit with the adjustable feet. Make sure screws in sides of cabinet aren't too tight as it can take the unit out of square pretty easily...
Other Parts Used:
-
Timothy from Falls Church, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fran
April 17, 2019
When the door was open, a person fell on it and it will not close now. I think the door is sprung. Is changing the door hinges the answer?
For model number wdt750sahzo
Hello Fran, thank you for your question. We would recommend replacing both door hinges, and checking the door balance link kit, Part #: PS972325, to be sure they haven't broken as well. I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
ROGER
November 20, 2018
The door will not support its self in the half open position, does the right or left hinge have a spring ?
For model number KUDP01ILBL3
Hi Roger, thank you for your question. Yes you do have springs on either side of your hinges. However it sounds like you may want to look at your door balance kit first. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Naomi
March 30, 2023
The door was open and someone fell on the door, and now the door won’t close. What parts should we replace to fix this? Thanks!!
For model number MDB8989SHZO
Hello Naomi, thank you for contacting us. Based on the description that you have provided, we would recommend checking the door hinge-left side, part number PS11746184, and the door hinge-right side, part number PS11746183. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746183
Manufacturer Part Number: WP8534853
Manufacturer Part Number: WP8534853
Brand
Model Number
Description
Kenmore
66213292K112
Dishwasher
- Kenmore Dishwasher Model 662.13292K112 (66213292K112, 662 13292K112) Parts
Kenmore
66512762K311
Dishwasher
- Kenmore Dishwasher Model 665.12762K311 (66512762K311, 665 12762K311) Parts
Kenmore
66512763K311
Dishwasher
- Kenmore Dishwasher Model 665.12763K311 (66512763K311, 665 12763K311) Parts
Kenmore
66512772K311
Dishwasher
- Kenmore Dishwasher Model 665.12772K311 (66512772K311, 665 12772K311) Parts
Kenmore
66512773K311
Dishwasher
- Kenmore Dishwasher Model 665.12773K311 (66512773K311, 665 12773K311) Parts