Product Description
Door Switch Specifications
This dishwasher door switch will shut your dishwasher off when the door is opened.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WP8269209 replaces these:
AP6012294, 8269209
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Greg P - August 9, 2019
Verified Purchase
Easy repair, but didn't solve the problem.
The part arrived very quickly, and safely. It hasn't solved the problem (likely not the part's fault:) ) so I can't give all five stars. The video tutorial was very helpful too.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher quit halfway thru a wash cycle
first I noticed that the dishwasher wasn't making any noise. Then I saw that there were no lights on the control panel. I opened the door and found water dripping off everything... I closed the door and tried hitting every button I could see, nothing happened. I checked the breaker, it was ok, and since I did all the wiring myself, I knew that was ok too. So I pulled off the upper panel of the front door and got out the electrical schematic that came with the washer.
first stop, the TCO, the thermal cutoff, it's like an inline fuse. I got 120 volts going in and nothing coming out. Did an ohm check and it was open.
Found it locally and replaced it. Now I've power to the control panel but the washer still doesn't work
because the micro switch in the handle is broken and that turns out to be the original problem...
the stupid plastic handle broke the micro-switch which shorted the TCO...
first stop, the TCO, the thermal cutoff, it's like an inline fuse. I got 120 volts going in and nothing coming out. Did an ohm check and it was open.
Found it locally and replaced it. Now I've power to the control panel but the washer still doesn't work
because the micro switch in the handle is broken and that turns out to be the original problem...
the stupid plastic handle broke the micro-switch which shorted the TCO...
Other Parts Used:
-
mike from lockport, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver
46 of 55 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit Would Not Work.
I had no lights on the console. Found the internal fuse blown, as I was looking around noticed the door latch also broken so I replaced that as well. Items were easy to identify from the bom and repairs completed in about 15-20 minutes. Dishes all clean now.
Other Parts Used:
-
Gary from Warrenton, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
19 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not start
Replaced the switch, that did not fix it, but a new circuit card did
Other Parts Used:
-
James from Norwich, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
9 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power to dishwasher. Quit mid-cycle.
Pulled front panel and replaced door switch. Extremely easy but did not fix the problem.
Other Parts Used:
-
Jon from Bend, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
8 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door lock micro switch
removed front panel and pry switch from latch then remove two wires and reverse to install.
Other Parts Used:
-
Joe from Layton, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
7 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not start
Opened electrical panal bby removing 6 screws. Removed old thermal fuse and put in new thermal fuse kit. Put panal back with 6 screws. Saved hundreds$
Other Parts Used:
-
Zenon from SEWELL, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff S.
November 28, 2018
Lights on control panel flash. Pushing cancel button does not work. Tried shutting off power to get unit to reset, but same result.
For model number KUDS301VWH3
Hello Jeff, thank you for your question. The first part I would recommend testing is the door switch. If the switch doesn't activate you won't be able to make any selections on the panel. The door switch is part number PS11745501. Here is a link that will show you how to test the door switch.
https://www.partselect.com/Dishwasher+test-door-switch+repair.htm
If the door switch is ok, the next step would be to test the bi metal fuse. Part number PS2360984. This part can be tested for continuity. If there is no continuity the part should be replaced. Also check the connection between the control panel and the board. If the previous information doesn't help, the issue would be with the control panel or electronic control board. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
July 24, 2019
The door latch fails mid-cycle every time i run it. I've replaced the latch and strike plate; that staved off the problem for 3 months. Then i replaced to the door balance link kit, which had no effect on the latch failure (it did solve the creak when opening the door!). Is replacing the door switch my next best option?
For model number KUDP02SRSS3
Hello Greg, thank you for your question. Yes, that would be the next step. It sounds like the door switch is faulty. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
February 28, 2018
Kitchen aid dishwasher will not operate. The "heavy duty" and "normal wash" blue lights blink but no other lights come on. Is there a reset setting or code? Any suggestions ? Thanks
For model number KUDS30IVBL4
Hi Gary, Thank you for the question. Sometimes the "Heavy Duty" and "Normal" lights will flash to indicate and error has been detected. You can reset the appliance by unpluging the dishwasher and wait two minutes and then return power to the machine. Open and close the dishwasher door firmly and select a new wash cycle, followed by Start. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
August 30, 2021
Will not come on wash. Blue clean light is blinking. Will come on to drain when you push cancel. Wash lights will come on when pressed but will not come on to wash when start/resume is pressed. Start/resume light flashes 3 times when pressed. Continuity is good on heating element and high limit thermostat. I replaced fuse but did not help. Thanks
For model number KUDI02FRSS0
Hello Paul, Thank you for the question. We suggest testing the Door Switch. If defective it will not allow the Wash Cycle to start. Use your ohmmeter to test your switch for continuity. Begin by setting your ohmmeter to measure resistance at a scale of Rx1. Touch the metal tips of the test leads together and zero your ohmmeter by adjusting the thumbwheel in the front of the meter until the needle reads '0' on the scale. Touch one meter lead to the COM terminal and the other lead to the N.O. terminal. Do not push in on the actuator. Your meter should give a reading of infinity, meaning the circuit is open, and there is no continuity. Without moving the meter's leads, press down on the actuator until you hear a 'click'. With the 'click' of the actuator, the meter should produce a resistance reading of zero ohms. This means the circuit is closed and continuity is present.Keep the meter lead that is touching the COM terminal in place, but move the other meter lead from the N.O. terminal to the N.C. terminal. You should receive a reading of infinity when you push in on the switch's actuator. When the actuator is released, you should receive a resistance reading of zero ohms.
Now, set your ohmmeter to its highest resistance scale and touch one meter lead to the N.O. terminal and the other meter lead to the N.C. terminal. The resistance reading between these two leads should be infinite.
Finally, take a resistance reading from both the N.C. terminal and the N.O. terminal to any metal mounting hardware that is a part of the switch assembly. You should receive a normal reading of infinity. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ed
August 13, 2019
Now I need a door switch on mine there is 2 of them with only one wire that plugs into them.
For model number GU2300XTVB2
Hello Ed, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11745501. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745501
Manufacturer Part Number: WP8269209
Manufacturer Part Number: WP8269209
Brand
Model Number
Description