Hose, Drain Pump
Fits your 11027042601!
$30.01
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 11027042601!
PartSelect Number
PS11745038
Manufacturer Part Number
WP8182767
Manufactured by
Whirlpool
Part Videos
Replacing your Whirlpool Washer Hose, Drain Pump
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore.
Part# WP8182767 replaces these:
AP6011839, 8182767
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
my daughters ferret chewed little pinholes in the pump hoses
two small compression clamps hold the hoses in place. these are very simple to remove, however to reinstall the new hoses you should unscrew the pumps with a nut driver, secure the hoses with the clamps, and then screw the pump back to the bottom of the drum. oh yeah make sure to put the back plate back on the machine
Other Parts Used:
-
jeffrey from chicago, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
11 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A rat ate holes in several rubber elbows in our washer
I got the three rubber elbows to quickly (at an additional price). They were the correct part and fit exactly. I replaced the aggravating spring clamps with new radiator-type screw clamps which made the job easier and in my opinion better. Then I devised a little hardware cloth "fence" around the bottom to the washer to keep the rat out. The job is tough enough in that you must tip the washer forward to get at the lower elbows. Also probably a good idea to adjust the feet "in" as far as possible to minimize rodent access from the bottom.
Other Parts Used:
-
James from INYOKERN, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kriste
April 19, 2018
My washing machine is leaking out of the bottom of the cabinet. How do I access this to determine what the problem is and fix it?
For model number WTW8200YW0
Hi Kriste, Thank you for the question. You will need to pull the appliance out from the wall and tip it back or remove the front and side cabinet panels. There are screws at the back of the appliance that hold the panels in place. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rene
December 13, 2018
Washer is going on 4 years old should the drain pump even be something going out on fairly new washer. I just want to make sure i purchased the correct part
For model number Wtw8500bwo
Hello Rene, thank you for your question. Yes, the drain pump is one of the most common parts to go bad on any washer of any age. This part gets a lot of wear and tear. I hope this helps!
Was this helpful?
Thank you for voting!
Sandra
March 18, 2023
Hi we have water leaking from the bottom. How do you know whether its the hose or the actual pump that needs replacing?
For model number Whirlpool Washing Machine Model WTW8200YW0
Hello Sandra, Thank you for your inquiry. You can visually examine both parts for any visible damage or restrictions, and you can test the drain pump with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps you.
Was this helpful?
Thank you for voting!
Kim
January 13, 2024
Whirlpool cabrio platinum leaking from under neath at front left corner.Just ordered a new drain pump and going to replace that.Also gives UL code when trying to spin.Going to replace suspension rods.Any other suggestions that would give a UL code?
For model number WTW8500BC0
Hi Kim, thank you for contacting us. The UL error code indicates that the load is out of balance. We would recommend checking that the load is properly balanced. The issue is most probably with the suspension rods, part number PS3502193. You may need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745038
Manufacturer Part Number: WP8182767
Manufacturer Part Number: WP8182767
Brand
Model Number
Description