![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Motorized Auto-Latch
Fits your ACS3350AC0!
$167.29
Special Order
Fits your ACS3350AC0!
PartSelect Number
PS11744644
Manufacturer Part Number
WP77001245
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Amana, Caloric.
Part# WP77001245 replaces these:
31933401, 77001245
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door on range would not close for self cleaning
First turn off power to stove with breaker or unplug it. Then remove three screws under the front of cook top, and lifted up cook top from the front. Then brace it up with a stick about 20 inches long so you can work. Now locate the latch at the front of range. Next get some paper and labeled where each wire is connected by color. Remove wires from old part, next take out two screws by the front of part. Remove a clip on left side of part that is holding the wires. Take old part out and replace with new part, put back the two screws in front of part. Next put the wires back on using the list you made. Then replace clip to hold wires. Now turn power back on,or plug it back in. Reset clock and your done.
Other Parts Used:
-
Freddie from Lowell, OR
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Autolatch assembly did not work
The repairman that had come had stated that this part is no longer made, but I was able to locate one through PartSelect and was able to replace it with minimal effort.
I removed the three screws that held down the stove glass top surface and had a person hold the stove top up while I removed the two screws which held the autolatch assembly in place. I then swapped the leads from the failed assembly to the new one and replaced the screws which were removed. New assembly tested out fine and oven was able to self-clean again.
I removed the three screws that held down the stove glass top surface and had a person hold the stove top up while I removed the two screws which held the autolatch assembly in place. I then swapped the leads from the failed assembly to the new one and replaced the screws which were removed. New assembly tested out fine and oven was able to self-clean again.
Other Parts Used:
-
Jeff from Wrightstown, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744644
Manufacturer Part Number: WP77001245
Manufacturer Part Number: WP77001245
Brand
Model Number
Description
Amana
ACS4250AC-PACS4250AC
Range
- Amana Range/Stove/Oven Model ACS4250AC-PACS4250AC (ACS4250ACPACS4250AC, ACS4250AC PACS4250AC) Parts
Amana
ACS4250AW-PACS4250AW
Range
- Amana Range/Stove/Oven Model ACS4250AW-PACS4250AW (ACS4250AWPACS4250AW, ACS4250AW PACS4250AW) Parts
Amana
AOCD2770WW-P1132359NWW
Range
- Amana Range/Stove/Oven Model AOCD2770WW-P1132359NWW (AOCD2770WWP1132359NWW, AOCD2770WW P1132359NWW) Parts
Amana
AOCD2770WW-P1132370NWW
Range
- Amana Range/Stove/Oven Model AOCD2770WW-P1132370NWW (AOCD2770WWP1132370NWW, AOCD2770WW P1132370NWW) Parts
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)