Broil Element - 3000W
Fits your CWE4800ACB!
$156.95
Special Order
Fits your CWE4800ACB!
PartSelect Number
PS11744512
Manufacturer Part Number
WP7406P203-60
Manufactured by
Whirlpool
Product Description
Broil Element - 3000W Specifications
This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling
This part works with the following products:
Wall Oven.
This part works with the following products:
Magic Chef, Maytag, Jenn-Air, Norge.
Part# WP7406P203-60 replaces these:
AP6011316, 74001234, 7406P090-60, 7406P203-60, W10314683
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broiler wasn't working
First, I left the new part on the kitchen counter for a couple of days. To my surprise, NOT, my husband didn't take the bait.
With no other options I took control. First I turned off the power to the wall oven, unscrewed the bracket at the back of the oven which holds the broiler in place. Then I unscrewed the brace on the top of the the oven, pulled the element out, unhooked the connectors for the old, connected the new, and slid broiler into the brace. Screwed that down then pushed wires and connectors back and screwed bracket in place. Turned power back on and tested - works great.
Still don't think my husband's noticed a thing. Somethings are just better left unsaid.
With no other options I took control. First I turned off the power to the wall oven, unscrewed the bracket at the back of the oven which holds the broiler in place. Then I unscrewed the brace on the top of the the oven, pulled the element out, unhooked the connectors for the old, connected the new, and slid broiler into the brace. Screwed that down then pushed wires and connectors back and screwed bracket in place. Turned power back on and tested - works great.
Still don't think my husband's noticed a thing. Somethings are just better left unsaid.
Other Parts Used:
-
kristen from Cape Elizabeth, ME
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wall Oven elements (Bake & Broil)
-
woodrow W from TEMPLE, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler heating element stopped working
Removed broiler element and replaced it with new element.
Part I received from partselect was a perfect match which made for a easy installation.
Part I received from partselect was a perfect match which made for a easy installation.
Other Parts Used:
-
Patrick from BROOKINGS, OR
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the burnt out Broil Element (Top)
The part arrived promptly and as described. I had already unscrewed the bad coil so it was easy to just put the new one back in on the open sockets. I then put the top support plate through the element and quickly screwed it back on.
Other Parts Used:
-
Richard from San Jose, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler element burned out
Removed 2 element support screws and 2 element electrical connection screws. Removed the old defective element and replaced it with the new element reusing the four screws.
I received the new element two days after ordering in. Excellent service!
I received the new element two days after ordering in. Excellent service!
Other Parts Used:
-
David from Brea, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julie
19 days ago
Will this fit 24” Maytag double wall oven
Thanks
For model number CWE5800ACB
Hello Julie, thank you for reaching out. Yes, the part you mentioned is compatible with your model. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744512
Manufacturer Part Number: WP7406P203-60
Manufacturer Part Number: WP7406P203-60
Brand
Model Number
Description