![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Surface Infinite Switch
Fits your AKT3040E!
$154.62
Special Order
Fits your AKT3040E!
PartSelect Number
PS11744436
Manufacturer Part Number
WP74011243
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Amana, Caloric, Maytag, Glenwood.
Part# WP74011243 replaces these:
0088873, 0315563, 31891201, 31891202, 32069501, 74008214, 74011243, 74349-02, 88873, Y0088873, Y0315563
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Small burner full hot all the time.
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch.
Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Reassembled and turned power on. Defective switch had stuck contacts making it full hot.
Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Reassembled and turned power on. Defective switch had stuck contacts making it full hot.
Other Parts Used:
-
RICHARD from PARADISE, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
16 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element switch needed repair as did an element size selector.
I remoed the two screws that hold the element switch in place and replaced the attached wires in an identical manner as I removed them from the previous bad switch. It was easy and workes perfectly.
Other Parts Used:
-
Dana from Ottumwa, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
6 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
January 18, 2018
The large burner on this stove heats except when i turn the switch to "low", then the burner goes cold. When i move the switch knob to the first indice above "low" the burner heats. I suspect the switch. Is this a good assumption ? ( all other burners are working great) this is a great stove and i really love it. Other than this little problem, the stove is great. Thank you, ms ashley hall, cornelius, oregon.
For model number ART6112WW
Hi Ashley,
Thank you for your question. Yes, you are correct. If you are trying to adjust the switch and the burner is not responding as it should, then the issue is with the switch and it will need to be replaced. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
October 15, 2019
My burner kept heating when it was in the off position. Thinking the switch is bad?
For model number Ak2t30e4
Hello Todd, Thank you for the question. Yes, the most likley issue is a defective switch that controls the element with the issue. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 14, 2020
Hello,
Looking to purchase a infinite switch for our stove top on one of the burners. Our stove top would show that one burner is still on. I am thinking that is the problem? Thoughts? Looks like your part number is ps11744436. Looking at the connection numbers they are different. Is this the correct switch? Is there a diagram showing the updated wire connections if it is the correct switch. Your help is greatly appreciated.
For model number akt3650e
Hi Mike. The right switch depends on which burner is faulty. We do not have a wiring diagram. You will need to take note of the positions of your old switch and connection them one at a time. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744436
Manufacturer Part Number: WP74011243
Manufacturer Part Number: WP74011243
Brand
Model Number
Description
Amana
ACC4370AB-PACC4370AB0
Range
- Amana Range/Stove/Oven Model ACC4370AB-PACC4370AB0 (ACC4370ABPACC4370AB0, ACC4370AB PACC4370AB0) Parts
Amana
ACC4370AW-PACC4370AW0
Range
- Amana Range/Stove/Oven Model ACC4370AW-PACC4370AW0 (ACC4370AWPACC4370AW0, ACC4370AW PACC4370AW0) Parts
Amana
ACS4250AC-PACS4250AC
Range
- Amana Range/Stove/Oven Model ACS4250AC-PACS4250AC (ACS4250ACPACS4250AC, ACS4250AC PACS4250AC) Parts
Amana
ACS4250AW-PACS4250AW
Range
- Amana Range/Stove/Oven Model ACS4250AW-PACS4250AW (ACS4250AWPACS4250AW, ACS4250AW PACS4250AW) Parts
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)