Product Description
Door Hinge - Left or Right Side Specifications
As per the manufacturer, when replacing the hinge, they recommend to also replace the hinge receptical also knows as the bracket. See related parts.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Wall Oven, Microwave Oven Combo.
This part works with the following products:
Jenn-Air, Maytag.
Part# WP74010283 replaces these:
AP6011189, 7106P117-60, 74010283
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Kevin E - May 25, 2021
Verified Purchase
Exactly what I needed fixed the problem
Super easy transaction and quick delivery. Oven door would not close properly due to the hinges being "sprung" changed them out in about 30mins fixed the problem.
David R - June 12, 2019
Verified Purchase
Great Service
The part arrived 2 days after I ordered it. It was the correct part and the install was a simple 15 minute job.
Peter C - December 27, 2018
Verified Purchase
Unexpectedly easy....less than 20 minutes. The door closes perfectly.
This is an easy repair, assuming the pins in the oven that receive the hinge are in good shape. For clear instructions take a look at the following Youtube video. https://youtu.be/BFg2LbLUrnQ
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door would not close tight - light would stay on.
Replaced the hinges, the appliance never really shut 100% and after several year it got worse. Now it is perfect and we don't have any problem with heat up time of oven, used to take extra long to get to desired temp. Should have sent it back in the beginning.
Other Parts Used:
-
MICHELLE from IMPERIAL, MO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Wrench (Adjustable)
16 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinges needed replaced
This was an easy repair and the parts fit perfectly. I removed the oven door by unlatching it and sliding it off. I then used a screwdriver to take the back cover off, and took the old hinges off with the screwdriver and replaced them with the two new ones that I ordered. I replaced the back of the door panel and put the screws back in and WA LA - just slid the door back on and tightened the latches.
Other Parts Used:
-
Teresa from Tomball, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
9 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our contractor had buggered up the hinges on our oven door and they needed to be replaced.
First, I thought we were in big trouble as our oven is in our house on a small island in the Bahamas. We thought our choices were to either take the door back to the US have it repaired and then bring it back to the island (which could take weeks) or fly a repairman in at a cost of about $1500. By my good fortune, I found Parts Select when I did a google search for Jenair Ovens and the website walked me through how to find and order the part. It was FedEx'd and within 48 hours our door was back on and we had an oven again! Thanks so much!
Other Parts Used:
-
David from Ft. Lauderdale, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinge no longer hinged
Door fell off so removal of door was easy. Removed screws holding the door together to expose hinges. Removed old hinges that were 3 screws for each hinge. Placed new hinges and installed screws then put door halves back together installed screws and then finally replaced door onto the stove. Mission accomplished
Other Parts Used:
-
Jerry from COLFAX, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven door would not close completely
After watching a you tube video or two, I easily detached the oven door. One of the hinges was jammed, and upon releasing it with a screwdriver, it snapped open and gashed my thumb. This as entirely my fault, I did not realize how much force was held in the spring.... You must remove the bottom frame piece and inside door pan to get to the hinges. All Phillips head screws, and all the same size. Once these are removed the hinges are easily removed with 3 Phillips head screws. While l was this far into it I removed the two layers of glass to clean them on both sides. This requires a small nut driver to remove the channels holding the glass. There are three layers of glass to clean on both sides, quite dirty and brown. Reassembled the whole thing. The door assembly popped right back in, and now functions like new. You can actually see into the oven, without opening the door!
Other Parts Used:
-
Terence from ATKINSON, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven door would not fully close
Rotated the hinge lock with a screwdriver, pulled door off hinge bracket, later door on table, removed screws to detach inner door frame from outer door. Three screws to remove each hinge. Very easy.
Other Parts Used:
-
Cameron from MECHANICSVLLE, MD
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
February 7, 2018
Install hinges
For model number jjw8527ddw
Hi Tom, Thank you for the question. To replace the hinges you will need to remove the door by unlatching the hinge and sliding the door up and off the appliance. Once the door is removed you just need to unscrew the old hinges. Reverse the steps to reinstall. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alisha
March 4, 2018
Hello. I need to replace the hinges on my double oven. I found the hinges but they say to also replace the hinge receptacle as well, also known as the bracket. Can you find that part number for me and is that necessary? Also, when the door fell off, it bent the latch/hook in the upper middle part of the oven that looks like it holds it closed. Can you help with that part as well? Thanks so much. Alisha
For model number JJW9830DDP
Hello Alisha, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11744384 for the hinge and the bracket is PartSelect Number: PS11744444. The hook is only sold as part of the latch, Part Number: PS11749848. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744384
Manufacturer Part Number: WP74010283
Manufacturer Part Number: WP74010283
Brand
Model Number
Description