Product Description
SEAL- DOOR Specifications
This oven door gasket prevents heat from escaping the oven cavity when in use.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Jenn-Air Wall Oven SEAL- DOOR
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Oven not heating evenly
This part works with the following products:
Wall Oven, Microwave Oven Combo, Range.
This part works with the following products:
Jenn-Air, Maytag, Amana, Kenmore.
Part# WP71001841 replaces these:
AP6010675, 71001841, 7212P061-60
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Barry P - September 24, 2020
Verified Purchase
Received in good time and as advertised
Just as anything for sale should do. The site also had a video on how to install it - excellent and accurate video. All good.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven door gasket was no longer flexible, but stiff
pulled out the old door gasket, it had little diamond-shaped clips, pulled out really easily, replaced with the new gasket. All the clips fit into the proper holes, stuffed the new ends where the old ones were. Perfect. less than 10 minutes. Thanks....
Other Parts Used:
-
cheryl from dolores, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
16 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My daughter tipped a large dish of lasagna onto the oven door and the seal.
The door seal was an exact fit for the factory one. There are little clips that hold the seal to the door. The clips are already installed in the seal. To remove just grasp the seal at each clip and pull up. The seal comes off easily. The ends of the seal are tucked into holes at the bottom of the door so you can just pull them out. For the installation of the new seal grasp the seal at each clip and push them into the littles holes. I used a flat blade screwdriver to tuck the seal ends into the two larger holes at the door bottom. The whole process took about 10 minutes.
I wouldn't have changed the seal but the hot lasagna made the seal sort of hard after it cooled off.
I wouldn't have changed the seal but the hot lasagna made the seal sort of hard after it cooled off.
Other Parts Used:
-
Thomas from LK HAVASU CTY, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faded electronic clock/worn oven seal
My husband would not relinquish the tools:(. It took him 15 min or less to change the electronic clock and maybe 2-3 min to change the seal. Niyyah, Scottsdale, AZ
Other Parts Used:
-
Frieda from Scottsdale, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
December 13, 2017
What is the length of this gasket.?
For model number part # Wp710011841
Hi Jim,
Thank you for your question. The length of this gasket is 73 inches. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
February 26, 2018
Will this gasket fit the Jenn air model number above?
For model number SVE47500B
Hi Joan, Thank you for the question. Yes, the PS11743859 is the correct Door Seal for the model number provided. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Woody
January 7, 2020
How do we remove the ends of the old seal to install the new one on our Maytag wall oven doors?
Hello Woody and thank you for writing.
You will need to open the oven door and remove the old seal by pulling it out of place with your hands. The old gasket will be secured with clips that will come out when you pull the entire piece out. The new gasket will have hooks all along the rim, which will line up with the oven door. Simply line up the hooks and push into place outlining the door of the inside of the oven. No tools required. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
December 7, 2023
I removed the old seal and it is over 80" long. The replacement is only 73" long per Q & A's and my measurment. Must the new seal be stretched to fit the door properly? need video
For model number JJW9630CAQ
Hello Ken, thank you for the question. The compatible door gasket for your model is part number PS11743859. It is 76.77 inches long. We have attached a relevant video which may not be the exact same model but will help while replacing the door gasket. Glad to be of help!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743859
Manufacturer Part Number: WP71001841
Manufacturer Part Number: WP71001841
Brand
Model Number
Description