Burner Tube
Fits your 11076132410!
$113.87
Special Order
Fits your 11076132410!
PartSelect Number
PS11743780
Manufacturer Part Number
WP693140
Manufactured by
Whirlpool
Product Description
Burner Tube Specifications
Includes hood.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# WP693140 replaces these:
AP6010597, 688617, 693140
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer had no heat at all. This is an older gas dryer.
Cleaned out years of fuzz behind lower access panel and noticed where the igniter sits there is a metal tube about 1 inch in diameter. It had rust on the end and was starting to flake away. Found some helpful hints about how to test the igniter. Very easy, just used an ohmeter. Unplugged the 2 pin wire connector and checked for continuity. 1 lead on 1 pin and the other on the other pin., igniter side not the harness side from the dryer. A good igniter should read less than 5 ohms. I don't know the spec. exacttly, but it should not read open or infinite resistance. My meter read an open circuit. Removed the tube and igniter assembly, mine only 2 small bolts. I found the igniter element cracked. Ordered and installed igniter and tube assembly. This was a very easy install. 20 year old dryer works great and it's better than spending $500.00+ on a new one.
Other Parts Used:
-
todd from MILFORD, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer would not work .
Took the old parts out and installed the new parts in , everything that you sent fit perfect!!!!!
Other Parts Used:
-
Tom from MEARS, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not dry the laundry
Unplug from electricity, turn off gas valve, raise top, remove front. Take drum out of cabinet, unhook gas line from burner assy. unhook electric wires, marking them for re installation. Remove, and replace burner tube. Reinstall burner assy attach wires and gas line. (Check for leaks) Reassemble drum to cabinet, rethread belt thru tensioner, reinstall front, let top back down on unit.
Other Parts Used:
-
Dale from LARRABEE, IA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench (Adjustable)
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan
September 9, 2017
Spins fine, but no Flame so no heat. Testing which part(s) to replace. 1) thermal fuse has continuity 2) radiant sensor (Flame sensor) has continuity 3) gas valve coils 3 prong 1 to 2 = 1255 ohms & 1 3 = 575 ohms & 2 prong = 1200 ohms; are those within range? 4) dryer gas igniter 67 ohms, is that within range? What else should i check and what would the associated test be continuity or ohms? Thanks so much
For model number kenmore gas dryer 110.70952990
Hi Alan,
Thank you for contacting us back. You may have to also check the the door catch and strike, the burner tube, the drum seal, the drive belt, the gas valve, the push-to-start switch, the temperature switch and the power relay. I hope this helps with the repair.
Was this helpful?
Thank you for voting!
Peter
December 13, 2019
The gas burner does light successfully but while lit i do smell gas, inside the dryer and outside from the vent. Would this be the correct part to fix this issue? Check you in advance. Power
For model number Kenmore 11073932101
Hello Peter, thank you for writing. This could just be a faulty Door Switch preventing the dryer from starting. The replacement for your model is part number PS11741701. You may also want to consider replacing the Igniter Kit, part number PS334180. Good luck with your repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743780
Manufacturer Part Number: WP693140
Manufacturer Part Number: WP693140
Brand
Model Number
Description