![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Dispenser Control Board
Fits your LSD2615HEB!
$73.38
Special Order
Fits your LSD2615HEB!
PartSelect Number
PS11743584
Manufacturer Part Number
WP67004258
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Maytag, Crosley, Admiral.
Part# WP67004258 replaces these:
67004258
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
September 11, 2017
How do I get this out and replaced
For model number PSD262LHEB
Hi David,
Thank you for the question, In order to install the new board you will need to remove the facade (face of the dispenser).Remove the facade by take the drip tray out to expose the 2 screws that hold the facade in place. Remove the screws and lift the facade off the door. remove the old board and reinstall the new board.
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
July 10, 2019
Water button is very hard to get pushed "on" is this the part I need?
For model number PSD262LHEB
Hello Paul, Thank you for the question. I suggest checking the Dispenser Facade, PartSelect Number PS11743585 to ensure the plastic part that pushes in when the button is pressed is not damaged. If the Facade is good, you will need the Dispenser Control Board. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
Kam
August 1, 2019
Is this product a 3 or 5 button ? My model is 3 button (water, crush & cube). My crush button does not light up but the other two do. Thanks
For model number GSD2615HEW
Hi Kam,
Thank you for your question. Based on the model number provided, this is a 5 button. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743584
Manufacturer Part Number: WP67004258
Manufacturer Part Number: WP67004258
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)