Gas Conversion Kit - Natural to LP
$58.44
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number
PS11743324
Manufacturer Part Number
WP63-6766
Manufactured by
Whirlpool
Product Description
Gas Conversion Kit - Natural to LP Specifications
This gas conversion kit converts a natural gas clothes dryer to a L.P clothes dryer. This kit contains a blocking plug, a burner orifice, a caution label, a rating label, and an instructions sheet.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Norge, Magic Chef, Admiral, Crosley.
Part# WP63-6766 replaces these:
AP6010147, 63-5016, 63-6766
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Mother-in-law's dryer quit heating. Her's was LPG, Replacment was NG
First, I inserted a screwdriver between the front panel and the top and popped the top loose. Next, there is a screw close to the top of the front panel on each side. Remove these. Next I unplugged the light switch from the front panel and removed the panel. Next, unscrew the gas line from the burner assy. and remove the screw holding the burner assy. to the frame. CAREFULLY, remove the burner assy. taking care not to break the ceramic igniter. Remove the assembly and unscrew the brass screw on the right side of the burner. Replace the screw with the new assembly furnished with the conversion kit. Remove the tube that directs the gas to the ducting. Unscrew the orifice fitting and replace with the new fittings furnished with the kit. Reinstall the tube and CAREFULLY return the burner assembly to the dryer. Screw the assy to the frame and re-connect the gas line. Replace the front panel, 2 screws, and snap the top back down onto the front panel, taking care to align the two guide pins. Connect the gas line to the dryer and install the ducting. Plug it in and test for leaks.
Other Parts Used:
-
ROBERT from HOUSTON, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
12 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I ordered part in anticipation of delivery of new dryer.
I asked a plumber to connect my new dryer. It came from the factory ready for natural gas and he needed the part to make it work with propane. My suggestion, ask a Whirlpool certified repairman. The plumber could not do the job and I had to ask a certified repairman out to do the job.
Other Parts Used:
-
Maria from Delaware, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743324
Manufacturer Part Number: WP63-6766
Manufacturer Part Number: WP63-6766
Brand
Model Number
Description