Orifice and Tube Assembly - Right Side
$122.10
On Order
PartSelect Number
PS11742985
Manufacturer Part Number
WP5787D104-60
Manufactured by
Whirlpool
Product Description
Orifice and Tube Assembly - Right Side Specifications
This part is the replacement orifice and tube assembly for your range. It is approximately 18 inches by 4 inches and is made of metal. The orifice and tube assembly controls the gas coming from the surface burner tube. It includes the front and rear orifices for the left or right surface burners. Be sure to unplug the range and shut off the gas supply before you begin this repair. This is an OEM part sourced directly from the manufacturer and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas smell
This part works with the following products:
Range.
This part works with the following products:
Maytag, Amana, Magic Chef, Crosley.
Part# WP5787D104-60 replaces these:
AP6009812, 5787D104-60, 74009832, 74010794
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken front burner gas lines
The biggest challenge with the repair was propping up stove top. This range doesn't have a prop arm, and the burner assemblies are attached by screws to stovetop. DIY'ers take note: take a minute to learn how your stove is designed before attempting to clean it by lifting the stovetop too high and breaking the front burner gas lines like I did on mine. Fortunately the new burner assemblies fit perfectly with no gas leaks, and the stove is working good as new. Thanks PartSelect!
Other Parts Used:
-
Richard from Salinas, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable), Wrench set
29 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 front burner (RIGHT AND LEFT) doesn't work
That's easy...unscrew the 4 top burner and open it slowly.
Open the tube's nut...i used the wrench.
Then install the new one.
And put it back together like before the first thing, and we got 2 burner worked.
It takes about 20-30 minutes.
Thanks Partselect.com
Now i know where i have to go if i need something special part for my household.
Open the tube's nut...i used the wrench.
Then install the new one.
And put it back together like before the first thing, and we got 2 burner worked.
It takes about 20-30 minutes.
Thanks Partselect.com
Now i know where i have to go if i need something special part for my household.
Other Parts Used:
-
Johana from Philadelphia, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
28 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broke gas supply lines to burners atpoint closes to controll knob. I did not remove 2 screws holding lines to stove top and when I lifted top they shear off. Rick Alice's husban thank you
. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
Other Parts Used:
-
ALICE from Crete, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
10 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lifted stove top broke gas lines
Replaced gas line and orifice assembly. Had to swap orifice for the LP Gas orifice I purchased with the stove. Install and adjust took about 45 minutes to complete including clean up and test.
Other Parts Used:
-
George from Big Rapids, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable), Wrench set
7 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It had broken gas lines
All I used was a Phillips screw driver and a small adjustable wrench. I removed top burners and wires i then removed small screws holding the top cover to the assembly. Then removed top cover, in the front I removed the four nuts holding the assembly. I removed assembly and installed new ones. Assembled back the same way.
Other Parts Used:
-
Victor from DINUBA, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742985
Manufacturer Part Number: WP5787D104-60
Manufacturer Part Number: WP5787D104-60
Brand
Model Number
Description