Tub Seal
Fits your SAV5910AWW Washer!
$70.64
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your SAV5910AWW Washer!
PartSelect Number
PS11742244
Manufacturer Part Number
WP40015401
Manufactured by
Whirlpool
Product Description
Tub Seal Specifications
This seal helps prevent any leaking around the transmission of washing machines.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Amana, Crosley.
Part# WP40015401 replaces these:
AP6009101, 37594, 40015401
Customer Repair Stories
Average Repair Rating: 2.2 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer made loud noise on spin only
Removed agitator, inner and outer tub, balance springs, motor assembly,transmission to get to bearing and seal in tub bottom.
Other Parts Used:
-
Donald from Glassboro, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
50 of 63 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very noisy in spin cycle.
Disassembled top and front of machine. Removed agitator cap, removed agitator by removing center bolt. Removed tub top ring, removed balance springs, removed inner tub drain tube,removed shaft nut with channel locks, removed 7 bolts from underneath holding inner tub with 5/16 ratchet. Removed inner tub. Removed bolts holding outter tub, removed outter tub. (rock back and forth to break up old detergent etc... to remove). W-D'd the locking nut after cleaning lint, detergent etc...,used short steel bar and hammer to loosen retaining nut with "L" shaped ears. (it is all one piece and the whole thing turns off, counter/clockwise removal).Remove bearing assembly, clean and install new, remove bearing seal from tub, clean and install new. ( used silicone caulk as additional seal, let set 24 hrs.)Re-assemble in reverse. Runs like new.
Other Parts Used:
-
Bruce from Springfield, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
28 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
growling noise on spin cycle, tub leaking
removed front, top & loosened side covers, removed agitator, removed inner drum & removed outer drum. had to release balance springs, it is a good idea to silicone in the new seal in the drum. this will prevent future leaks. removed lower plate containing the bearing & replaced. re-assembled in opposite order. i gave the silicone a day to cure before use, it works fine now. they say you need a special tool to remove the nut for the drum. i just used a pair of channellocks & tapped the handle, & it came right off.
Other Parts Used:
-
DONALD from CRYSTAL LAKE, IL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
25 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
September 20, 2022
Can you provide dimentional info for this seal i am looking for a seal for my outer tub the seal in a 495p3 is dimentionally correct but is an updated version
For model number Lw3903l/p1122404wl
Hi Peter,
Thank you for your question. The tub seal has an outer diameter of approximately 3-1/4 inches and it has an inner diameter of 1-1/2 inches. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742244
Manufacturer Part Number: WP40015401
Manufacturer Part Number: WP40015401
Brand
Model Number
Description