Push-To-Start Relay Switch
$75.17
Special Order
PartSelect Number
PS11741494
Manufacturer Part Number
WP3398096
Manufactured by
Whirlpool
Product Description
Push-To-Start Relay Switch Specifications
This part is used to start the dryer once you have selected a setting on the timer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Roper, KitchenAid, Estate, Whirlpool.
Part# WP3398096 replaces these:
3398096
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would not turn on and when dryer door was opened it would not turn off
First, I replaced the door switch. Removed 2 screws for the lint catcher and then pryed up both front edges to lift the top. Remove 2 screws for switch disconnect the switch and replaced.
Second, I replaced the push to start switch. Remove 6 bolts on back panel and remove. Remove locking clip from switch and pull out switch and replace. Reinstall switch and locking clip put knob back on and install back panel. DONE
Second, I replaced the push to start switch. Remove 6 bolts on back panel and remove. Remove locking clip from switch and pull out switch and replace. Reinstall switch and locking clip put knob back on and install back panel. DONE
Other Parts Used:
-
Neil from JESSUP, PA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Angee
February 6, 2019
My dryer wont start when i push the start button. The light is on in the dryer, but will not start when i push the button. Could it be the rely start switch?
For model number TEDS780JQ0
Hello Angee, thank you for your question. We would recommend testing both the door switch and the start switch. The PartSelect Number: PS11741701 is the door switch and the push to start switch is PartSelect Number: PS11741494. The issue could be related to either of those parts. You can also run a test where you open the dryer door depress the door switch and push the start switch at the same time. Give the drum a little push to see if the motor will start. If it does start and continue to tumble, the issue could be the motor or the start switch. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741494
Manufacturer Part Number: WP3398096
Manufacturer Part Number: WP3398096
Brand
Model Number
Description