Vent Assembly (Includes Item 6
Fits your 66517729K900!
$63.41
Special Order
Fits your 66517729K900!
PartSelect Number
PS11741358
Manufacturer Part Number
WP3379674
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, Estate, Maytag.
Part# WP3379674 replaces these:
3379674
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water dripped out from the bottom of door.
Diagnosing the problem, i.e. finding the source of the leak, was the hardest part. The best clue was the leak only occurred well into the cycle when the water was hot and steam was coming out the vent. I then assumed there was a bad seal and steam & condensed water was leaking down into the door. I replaced the vent duct & seal, a broken drip cover (an internal part in the door), and replaced a missing rinse aid cap. This stopped the leak.
Other Parts Used:
-
Louis from Niceville, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
24 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Steam venting past gasket causing short in switch at handle lock.
Removed inner cover of door. Pried Vent Assembly from door, peeled off thin sponge gasket strip from inner door, installed new thin sponge gasket strip on inner door vent opening bottom, snapped Vent Assembly into inner door opening, reinstalled inner door cover to door.
Recommend removing Vent screen from inner door first to expose locking tabs of Vent Assembly to ease removal and installation of Vent Assembly. I assume vent cover will come off if pried with small screw driver. I didn't remove vent cover and had difficulty removing and installing Vent Assembly. (I did accomplish it though)
Recommend removing Vent screen from inner door first to expose locking tabs of Vent Assembly to ease removal and installation of Vent Assembly. I assume vent cover will come off if pried with small screw driver. I didn't remove vent cover and had difficulty removing and installing Vent Assembly. (I did accomplish it though)
Other Parts Used:
-
Edward from Sebastopol, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
9 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Burns
December 10, 2019
I cannot find where part number ps11741358 is located on the door. My machine is leaking from the bottom of the door and I want to check this part to see if it needs replacing or it is stopped up causing the leak. Thank you
For model number 3505416
Hello Burns, Thank you for the question. You will need to remove the inner door panel to expose and check the Vent. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
May 30, 2019
Will this part stop the leak and will it fit my dishwasher
For model number du945pwsqo
Hello Frank, thank you for inquiring. This Vent Assembly is compatible to your model, but is not one of the options that may fix your leak. You will want to consider the Door Gasket part PS11755809, the Water Inlet Valve part PS11730996, or the Drain and Wash Impeller Kit part PS382822. We hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741358
Manufacturer Part Number: WP3379674
Manufacturer Part Number: WP3379674
Brand
Model Number
Description
Kenmore
65715755791
Dishwasher
- Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts