Seal, Door Vent
Fits your 66517732K900!
$12.74
Special Order
Fits your 66517732K900!
PartSelect Number
PS11741357
Manufacturer Part Number
WP3379673
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, Estate, Maytag.
Part# WP3379673 replaces these:
3379673
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karl
January 29, 2019
How to replace the door vent seal on my Whirlpool dishwasher
For model number gu940scgq0
Hello Karl, Thank you for the question. You can replace the Seal by removing the inside panel of the door and pulling and cleaning off the old seal and replacing with the new one. The vent assembly snaps out and will snap back into place. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Frank Weber
May 27, 2019
Will the this seal; cause it to leak under the door
For model number du945pwsqu
Hello Frank, thank you for your question. The two parts that, if worn or broken, can cause the door to leak are PartSelect Number: PS11755809 door seal and the door frame Part #: PS11747071 which includes the bottom seal. The part number you have referenced is just the door vent seal, and wouldn't cause the door to leak at the bottom. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Beverly
February 13, 2020
My dishwasher, Kenmore 665.15732000 leaks from the bottom of the front door. I took the nut off of the bottom spray assembly, and removed the spray arm. There was a plastic seal ring that had a split in it. I didn't know if the split was supposed to be in it, but my brother in law stapled it top and bottom to close the gap. That did not help. Water still coming from bottom of door. The long gasket that goes around door opening, top and sides appears to be okay. Is there a bottom door seal that i can't see that would cause this problem? Please help!
For model number 66515732000
Hello Beverly,
Thank you for your question. The seal that goes on the spray arm, is supposed to be split. It is not a defect, the manufacturer purposely makes it that way. There is not a specific bottom dear seal piece for your model 66515732000. If you have checked your door gasket and lower spray arm seal, we would recommend checking your Wash Arm Bearing ring under part number PS11747064. That is another type of seal on the spray arm that can cause your leak as well. We hope this helps you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741357
Manufacturer Part Number: WP3379673
Manufacturer Part Number: WP3379673
Brand
Model Number
Description
Kenmore
65715755791
Dishwasher
- Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts